RTL88x2BU-Linux-Driver/hal/rtl8822b/usb/rtl8822bu_ops.c
2021-12-04 07:42:09 -05:00

337 lines
8.5 KiB
C

/******************************************************************************
*
* Copyright(c) 2015 - 2017 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*****************************************************************************/
#define _RTL8822BU_OPS_C_
#include <drv_types.h> /* PADAPTER, basic_types.h and etc. */
#include <hal_intf.h> /* struct hal_ops */
#include <hal_data.h> /* HAL_DATA_TYPE */
#include "../../hal_halmac.h" /* register define */
#include "../rtl8822b.h" /* 8822b hal common define. rtl8822bu_init_default_value ...*/
#include "rtl8822bu.h" /* 8822bu functions */
#ifdef CONFIG_SUPPORT_USB_INT
static void rtl8822bu_interrupt_handler(PADAPTER padapter, u16 pkt_len, u8 *pbuf)
{
}
#endif /* CONFIG_SUPPORT_USB_INT */
void rtl8822bu_set_hw_type(struct dvobj_priv *pdvobj)
{
pdvobj->HardwareType = HARDWARE_TYPE_RTL8822BU;
RTW_INFO("CHIP TYPE: RTL8822B\n");
}
static u8 sethwreg(PADAPTER padapter, u8 variable, u8 *val)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter);
struct pwrctrl_priv *pwrctl = adapter_to_pwrctl(padapter);
struct registry_priv *registry_par = &padapter->registrypriv;
int status = 0;
u8 ret = _SUCCESS;
switch (variable) {
case HW_VAR_RXDMA_AGG_PG_TH:
#ifdef CONFIG_USB_RX_AGGREGATION
if (pdvobjpriv->traffic_stat.cur_tx_tp < 1 && pdvobjpriv->traffic_stat.cur_rx_tp < 1) {
/* for low traffic, do not usb AGGREGATION */
pHalData->rxagg_usb_timeout = 0x01;
pHalData->rxagg_usb_size = 0x01;
} else {
#ifdef CONFIG_PLATFORM_NOVATEK_NT72668
pHalData->rxagg_usb_timeout = 0x20;
pHalData->rxagg_usb_size = 0x03;
#elif defined(CONFIG_PLATFORM_HISILICON)
/* use 16k to workaround for HISILICON platform */
pHalData->rxagg_usb_timeout = 8;
pHalData->rxagg_usb_size = 3;
#else
/* default setting */
pHalData->rxagg_usb_timeout = 0x20;
pHalData->rxagg_usb_size = 0x05;
#endif
}
rtw_halmac_rx_agg_switch(pdvobjpriv, _TRUE);
#if 0
RTW_INFO("\n==========RAFFIC_STATISTIC==============\n");
RTW_INFO("cur_tx_bytes:%lld\n", pdvobjpriv->traffic_stat.cur_tx_bytes);
RTW_INFO("cur_rx_bytes:%lld\n", pdvobjpriv->traffic_stat.cur_rx_bytes);
RTW_INFO("last_tx_bytes:%lld\n", pdvobjpriv->traffic_stat.last_tx_bytes);
RTW_INFO("last_rx_bytes:%lld\n", pdvobjpriv->traffic_stat.last_rx_bytes);
RTW_INFO("cur_tx_tp:%d\n", pdvobjpriv->traffic_stat.cur_tx_tp);
RTW_INFO("cur_rx_tp:%d\n", pdvobjpriv->traffic_stat.cur_rx_tp);
RTW_INFO("\n========================\n");
#endif
#endif
break;
case HW_VAR_SET_RPWM:
#ifdef CONFIG_LPS_LCLK
{
u8 ps_state = *((u8 *)val);
/*rpwm value only use BIT0(clock bit) ,BIT6(Ack bit), and BIT7(Toggle bit) for 88e.
BIT0 value - 1: 32k, 0:40MHz.
BIT6 value - 1: report cpwm value after success set, 0:do not report.
BIT7 value - Toggle bit change.
modify by Thomas. 2012/4/2.*/
ps_state = ps_state & 0xC1;
/* RTW_INFO("##### Change RPWM value to = %x for switch clk #####\n", ps_state); */
rtw_write8(padapter, REG_USB_HRPWM_8822B, ps_state);
}
#endif
break;
case HW_VAR_AMPDU_MAX_TIME:
rtw_write8(padapter, REG_AMPDU_MAX_TIME_V1_8822B, 0x70);
break;
case HW_VAR_USB_MODE:
/* U2 to U3 */
if (registry_par->switch_usb_mode == 1) {
if (IS_HIGH_SPEED_USB(padapter)) {
status = rtw_halmac_switch_usb_mode(adapter_to_dvobj(padapter), RTW_USB_SPEED_3);
if (status)
*val = _TRUE;
}
} else if (registry_par->switch_usb_mode == 2) {
/* U3 to U2 */
if (IS_SUPER_SPEED_USB(padapter)) {
status = rtw_halmac_switch_usb_mode(adapter_to_dvobj(padapter), RTW_USB_SPEED_2);
if (status)
*val = _TRUE;
}
}
break;
default:
ret = rtl8822b_sethwreg(padapter, variable, val);
break;
}
return ret;
}
static void gethwreg(PADAPTER padapter, u8 variable, u8 *val)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
switch (variable) {
case HW_VAR_CPWM:
#ifdef CONFIG_LPS_LCLK
*val = rtw_read8(padapter, REG_USB_HCPWM_8822B);
/* RTW_INFO("##### REG_USB_HCPWM(0x%02x) = 0x%02x #####\n", REG_USB_HCPWM_8822B, *val); */
#endif /* CONFIG_LPS_LCLK */
break;
case HW_VAR_RPWM_TOG:
#ifdef CONFIG_LPS_LCLK
*val = rtw_read8(padapter, REG_USB_HRPWM_8822B);
*val &= BIT_TOGGLE_8822B;
#endif /* CONFIG_LPS_LCLK */
break;
default:
rtl8822b_gethwreg(padapter, variable, val);
break;
}
}
/*
Description:
Change default setting of specified variable.
*/
static u8 sethaldefvar(PADAPTER padapter, HAL_DEF_VARIABLE eVariable, void *pValue)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
u8 bResult = _SUCCESS;
switch (eVariable) {
default:
rtl8822b_sethaldefvar(padapter, eVariable, pValue);
break;
}
return bResult;
}
/*
Description:
Query setting of specified variable.
*/
static u8 gethaldefvar(PADAPTER padapter, HAL_DEF_VARIABLE eVariable, void *pValue)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
u8 bResult = _SUCCESS;
switch (eVariable) {
case HW_VAR_MAX_RX_AMPDU_FACTOR:
*(HT_CAP_AMPDU_FACTOR *)pValue = MAX_AMPDU_FACTOR_64K;
break;
default:
bResult = rtl8822b_gethaldefvar(padapter, eVariable, pValue);
break;
}
return bResult;
}
static void rtl8822bu_init_default_value(PADAPTER padapter)
{
rtl8822b_init_default_value(padapter);
}
static u8 rtl8822bu_ps_func(PADAPTER padapter, HAL_INTF_PS_FUNC efunc_id, u8 *val)
{
u8 bResult = _TRUE;
switch (efunc_id) {
default:
break;
}
return bResult;
}
#ifdef CONFIG_RTW_LED
static void read_ledsetting(PADAPTER adapter)
{
struct led_priv *ledpriv = adapter_to_led(adapter);
#ifdef CONFIG_RTW_SW_LED
PHAL_DATA_TYPE hal;
hal = GET_HAL_DATA(adapter);
ledpriv->bRegUseLed = _TRUE;
switch (hal->EEPROMCustomerID) {
default:
hal->CustomerID = RT_CID_DEFAULT;
break;
}
switch (hal->CustomerID) {
case RT_CID_DEFAULT:
default:
ledpriv->LedStrategy = SW_LED_MODE9;
break;
}
#else /* HW LED */
ledpriv->LedStrategy = HW_LED;
#endif /* CONFIG_RTW_SW_LED */
}
#endif /* CONFIG_RTW_LED */
/*
* Description:
* Collect all hardware information, fill "HAL_DATA_TYPE".
* Sometimes this would be used to read MAC address.
* This function will do
* 1. Read Efuse/EEPROM to initialize
* 2. Read registers to initialize
* 3. Other vaiables initialization
*/
static u8 read_adapter_info(PADAPTER padapter)
{
u8 ret = _FAIL;
/*
* 1. Read Efuse/EEPROM to initialize
*/
if (rtl8822b_read_efuse(padapter) != _SUCCESS)
goto exit;
/*
* 2. Read registers to initialize
*/
/*
* 3. Other Initialization
*/
#ifdef CONFIG_RTW_LED
read_ledsetting(padapter);
#endif /* CONFIG_RTW_LED */
ret = _SUCCESS;
exit:
return ret;
}
void rtl8822bu_set_hal_ops(PADAPTER padapter)
{
struct hal_ops *ops;
int err;
err = rtl8822bu_halmac_init_adapter(padapter);
if (err) {
RTW_INFO("%s: [ERROR]HALMAC initialize FAIL!\n", __func__);
return;
}
rtl8822b_set_hal_ops(padapter);
ops = &padapter->hal_func;
ops->hal_init = rtl8822bu_init;
ops->hal_deinit = rtl8822bu_deinit;
ops->inirp_init = rtl8822bu_inirp_init;
ops->inirp_deinit = rtl8822bu_inirp_deinit;
ops->init_xmit_priv = rtl8822bu_init_xmit_priv;
ops->free_xmit_priv = rtl8822bu_free_xmit_priv;
ops->init_recv_priv = rtl8822bu_init_recv_priv;
ops->free_recv_priv = rtl8822bu_free_recv_priv;
#ifdef CONFIG_RTW_SW_LED
ops->InitSwLeds = rtl8822bu_initswleds;
ops->DeInitSwLeds = rtl8822bu_deinitswleds;
#endif
ops->init_default_value = rtl8822bu_init_default_value;
ops->intf_chip_configure = rtl8822bu_interface_configure;
ops->read_adapter_info = read_adapter_info;
ops->set_hw_reg_handler = sethwreg;
ops->GetHwRegHandler = gethwreg;
ops->get_hal_def_var_handler = gethaldefvar;
ops->SetHalDefVarHandler = sethaldefvar;
ops->hal_xmit = rtl8822bu_hal_xmit;
ops->mgnt_xmit = rtl8822bu_mgnt_xmit;
#ifdef CONFIG_RTW_MGMT_QUEUE
ops->hal_mgmt_xmitframe_enqueue = rtl8822bu_hal_mgmt_xmitframe_enqueue;
#endif
ops->hal_xmitframe_enqueue = rtl8822bu_hal_xmitframe_enqueue;
#ifdef CONFIG_HOSTAPD_MLME
ops->hostap_mgnt_xmit_entry = rtl8822bu_hostap_mgnt_xmit_entry;
#endif
ops->interface_ps_func = rtl8822bu_ps_func;
#ifdef CONFIG_XMIT_THREAD_MODE
ops->xmit_thread_handler = rtl8822bu_xmit_buf_handler;
#endif
#ifdef CONFIG_SUPPORT_USB_INT
ops->interrupt_handler = rtl8822bu_interrupt_handler;
#endif
}