RTL88x2BU-Linux-Driver/hal/phydm/phydm_rainfo.h

454 lines
8.8 KiB
C

/******************************************************************************
*
* Copyright(c) 2007 - 2017 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* wlanfae <wlanfae@realtek.com>
* Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
* Hsinchu 300, Taiwan.
*
* Larry Finger <Larry.Finger@lwfinger.net>
*
*****************************************************************************/
#ifndef __PHYDMRAINFO_H__
#define __PHYDMRAINFO_H__
/*#define RAINFO_VERSION "2.0"*/ /*2014.11.04*/
/*#define RAINFO_VERSION "3.0"*/ /*2015.01.13 Dino*/
/*#define RAINFO_VERSION "3.1"*/ /*2015.01.14 Dino*/
/*#define RAINFO_VERSION "3.3"*/ /*2015.07.29 YuChen*/
/*#define RAINFO_VERSION "3.4"*/ /*2015.12.15 Stanley*/
/*#define RAINFO_VERSION "4.0"*/ /*2016.03.24 Dino, Add more RA mask state and Phydm-lize partial ra mask function */
/*#define RAINFO_VERSION "4.1"*/ /*2016.04.20 Dino, Add new function to adjust PCR RA threshold */
/*#define RAINFO_VERSION "4.2"*/ /*2016.05.17 Dino, Add H2C debug cmd */
/*#define RAINFO_VERSION "4.3"*/ /*2016.07.11 Dino, Fix RA hang in CCK 1M problem */
#define RAINFO_VERSION "5.0" /*2017.04.20 Dino, the 3rd PHYDM reform*/
#define FORCED_UPDATE_RAMASK_PERIOD 5
#define H2C_MAX_LENGTH 7
#define RA_FLOOR_UP_GAP 3
#define RA_FLOOR_TABLE_SIZE 7
#define ACTIVE_TP_THRESHOLD 1
#define RA_RETRY_DESCEND_NUM 2
#define RA_RETRY_LIMIT_LOW 4
#define RA_RETRY_LIMIT_HIGH 32
#if (DM_ODM_SUPPORT_TYPE == ODM_AP)
#define RA_FIRST_MACID 1
#elif (DM_ODM_SUPPORT_TYPE == ODM_WIN)
#define RA_FIRST_MACID 0
#define WIN_DEFAULT_PORT_MACID 0
#define WIN_BT_PORT_MACID 2
#else /*if (DM_ODM_SUPPORT_TYPE == ODM_CE)*/
#define RA_FIRST_MACID 0
#endif
enum phydm_ra_dbg_para {
RADBG_PCR_TH_OFFSET = 0,
RADBG_RTY_PENALTY = 1,
RADBG_N_HIGH = 2,
RADBG_N_LOW = 3,
RADBG_TRATE_UP_TABLE = 4,
RADBG_TRATE_DOWN_TABLE = 5,
RADBG_TRYING_NECESSARY = 6,
RADBG_TDROPING_NECESSARY = 7,
RADBG_RATE_UP_RTY_RATIO = 8,
RADBG_RATE_DOWN_RTY_RATIO = 9, /* u8 */
RADBG_DEBUG_MONITOR1 = 0xc,
RADBG_DEBUG_MONITOR2 = 0xd,
RADBG_DEBUG_MONITOR3 = 0xe,
RADBG_DEBUG_MONITOR4 = 0xf,
RADBG_DEBUG_MONITOR5 = 0x10,
NUM_RA_PARA
};
enum phydm_wireless_mode {
PHYDM_WIRELESS_MODE_UNKNOWN = 0x00,
PHYDM_WIRELESS_MODE_A = 0x01,
PHYDM_WIRELESS_MODE_B = 0x02,
PHYDM_WIRELESS_MODE_G = 0x04,
PHYDM_WIRELESS_MODE_AUTO = 0x08,
PHYDM_WIRELESS_MODE_N_24G = 0x10,
PHYDM_WIRELESS_MODE_N_5G = 0x20,
PHYDM_WIRELESS_MODE_AC_5G = 0x40,
PHYDM_WIRELESS_MODE_AC_24G = 0x80,
PHYDM_WIRELESS_MODE_AC_ONLY = 0x100,
PHYDM_WIRELESS_MODE_MAX = 0x800,
PHYDM_WIRELESS_MODE_ALL = 0xFFFF
};
enum phydm_rateid_idx {
PHYDM_BGN_40M_2SS = 0,
PHYDM_BGN_40M_1SS = 1,
PHYDM_BGN_20M_2SS = 2,
PHYDM_BGN_20M_1SS = 3,
PHYDM_GN_N2SS = 4,
PHYDM_GN_N1SS = 5,
PHYDM_BG = 6,
PHYDM_G = 7,
PHYDM_B_20M = 8,
PHYDM_ARFR0_AC_2SS = 9,
PHYDM_ARFR1_AC_1SS = 10,
PHYDM_ARFR2_AC_2G_1SS = 11,
PHYDM_ARFR3_AC_2G_2SS = 12,
PHYDM_ARFR4_AC_3SS = 13,
PHYDM_ARFR5_N_3SS = 14
};
#if (RATE_ADAPTIVE_SUPPORT == 1)/* 88E RA */
struct _odm_ra_info_ {
u8 rate_id;
u32 rate_mask;
u32 ra_use_rate;
u8 rate_sgi;
u8 rssi_sta_ra;
u8 pre_rssi_sta_ra;
u8 sgi_enable;
u8 decision_rate;
u8 pre_rate;
u8 highest_rate;
u8 lowest_rate;
u32 nsc_up;
u32 nsc_down;
u16 RTY[5];
u32 TOTAL;
u16 DROP;
u8 active;
u16 rpt_time;
u8 ra_waiting_counter;
u8 ra_pending_counter;
u8 ra_drop_after_down;
#if 1 /* POWER_TRAINING_ACTIVE == 1 */ /* For compile pass only~! */
u8 pt_active; /* on or off */
u8 pt_try_state; /* 0 trying state, 1 for decision state */
u8 pt_stage; /* 0~6 */
u8 pt_stop_count; /* Stop PT counter */
u8 pt_pre_rate; /* if rate change do PT */
u8 pt_pre_rssi; /* if RSSI change 5% do PT */
u8 pt_mode_ss; /* decide whitch rate should do PT */
u8 ra_stage; /* StageRA, decide how many times RA will be done between PT */
u8 pt_smooth_factor;
#endif
#if (DM_ODM_SUPPORT_TYPE == ODM_AP) && ((DEV_BUS_TYPE == RT_USB_INTERFACE) || (DEV_BUS_TYPE == RT_SDIO_INTERFACE))
u8 rate_down_counter;
u8 rate_up_counter;
u8 rate_direction;
u8 bounding_type;
u8 bounding_counter;
u8 bounding_learning_time;
u8 rate_down_start_time;
#endif
};
#endif
struct ra_table {
u8 firstconnect;
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
boolean PT_collision_pre;
#endif
#if (defined(CONFIG_RA_DBG_CMD))
boolean is_ra_dbg_init;
u8 RTY_P[ODM_NUM_RATE_IDX];
u8 RTY_P_default[ODM_NUM_RATE_IDX];
boolean RTY_P_modify_note[ODM_NUM_RATE_IDX];
u8 RATE_UP_RTY_RATIO[ODM_NUM_RATE_IDX];
u8 RATE_UP_RTY_RATIO_default[ODM_NUM_RATE_IDX];
boolean RATE_UP_RTY_RATIO_modify_note[ODM_NUM_RATE_IDX];
u8 RATE_DOWN_RTY_RATIO[ODM_NUM_RATE_IDX];
u8 RATE_DOWN_RTY_RATIO_default[ODM_NUM_RATE_IDX];
boolean RATE_DOWN_RTY_RATIO_modify_note[ODM_NUM_RATE_IDX];
boolean ra_para_feedback_req;
u8 para_idx;
u8 rate_idx;
u8 value;
u16 value_16;
u8 rate_length;
#endif
/*u8 link_tx_rate[ODM_ASSOCIATE_ENTRY_NUM];*/
u8 mu1_rate[30];
u8 highest_client_tx_order;
u16 highest_client_tx_rate_order;
u8 power_tracking_flag;
u8 RA_threshold_offset;
u8 RA_offset_direction;
u8 up_ramask_cnt; /*force update_ra_mask counter*/
u8 up_ramask_cnt_tmp; /*Just for debug, should be removed latter*/
#if (defined(CONFIG_RA_DYNAMIC_RTY_LIMIT))
u8 per_rate_retrylimit_20M[ODM_NUM_RATE_IDX];
u8 per_rate_retrylimit_40M[ODM_NUM_RATE_IDX];
u8 retry_descend_num;
u8 retrylimit_low;
u8 retrylimit_high;
#endif
u8 ldpc_thres; /* if RSSI > ldpc_thres => switch from LPDC to BCC */
void (*record_ra_info)(void *dm_void, u8 macid, struct cmn_sta_info *sta, u64 ra_mask);
};
void
phydm_h2C_debug(
void *dm_void,
u32 *const dm_value,
u32 *_used,
char *output,
u32 *_out_len
);
#if (defined(CONFIG_RA_DBG_CMD))
void
odm_RA_debug(
void *dm_void,
u32 *const dm_value
);
void
odm_ra_para_adjust_init(
void *dm_void
);
#endif
void
phydm_ra_debug(
void *dm_void,
char input[][16],
u32 *_used,
char *output,
u32 *_out_len
);
void
odm_c2h_ra_para_report_handler(
void *dm_void,
u8 *cmd_buf,
u8 cmd_len
);
void
odm_ra_para_adjust(
void *dm_void
);
void
phydm_ra_dynamic_retry_count(
void *dm_void
);
void
phydm_ra_dynamic_retry_limit(
void *dm_void
);
void
phydm_print_rate(
void *dm_void,
u8 rate,
u32 dbg_component
);
void
phydm_c2h_ra_report_handler(
void *dm_void,
u8 *cmd_buf,
u8 cmd_len
);
u8
phydm_rate_order_compute(
void *dm_void,
u8 rate_idx
);
void
phydm_ra_info_watchdog(
void *dm_void
);
void
phydm_ra_info_init(
void *dm_void
);
void
phydm_modify_RA_PCR_threshold(
void *dm_void,
u8 RA_offset_direction,
u8 RA_threshold_offset
);
u8
phydm_vht_en_mapping(
void *dm_void,
u32 wireless_mode
);
u8
phydm_rate_id_mapping(
void *dm_void,
u32 wireless_mode,
u8 rf_type,
u8 bw
);
void
phydm_update_hal_ra_mask(
void *dm_void,
u32 wireless_mode,
u8 rf_type,
u8 BW,
u8 mimo_ps_enable,
u8 disable_cck_rate,
u32 *ratr_bitmap_msb_in,
u32 *ratr_bitmap_in,
u8 tx_rate_level
);
void
phydm_refresh_rate_adaptive_mask(
void *dm_void
);
u8
phydm_rssi_lv_dec(
void *dm_void,
u32 rssi,
u8 ratr_state
);
void
odm_ra_post_action_on_assoc(
void *dm
);
u8
odm_find_rts_rate(
void *dm_void,
u8 tx_rate,
boolean is_erp_protect
);
void
phydm_show_sta_info(
void *dm_void,
char input[][16],
u32 *_used,
char *output,
u32 *_out_len,
u32 input_num
);
u8
phydm_get_plcp(
void *dm_void,
u16 macid
);
#ifdef PHYDM_3RD_REFORM_RA_MASK
void
phydm_ra_registed(
void *dm_void,
u8 macid,
u8 rssi_from_assoc
);
void
phydm_ra_offline(
void *dm_void,
u8 macid
);
void
phydm_ra_mask_watchdog(
void *dm_void
);
#endif
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
void
odm_refresh_basic_rate_mask(
void *dm_void
);
void
odm_update_init_rate_work_item_callback(
void *context
);
void
odm_refresh_ldpc_rts_mp(
void *adapter,
struct dm_struct *dm,
u8 m_mac_id,
u8 iot_peer,
s32 undecorated_smoothed_pwdb
);
#elif (DM_ODM_SUPPORT_TYPE & (ODM_AP))
void
phydm_gen_ramask_h2c_AP(
void *dm_void,
struct rtl8192cd_priv *priv,
struct sta_info *entry,
u8 rssi_level
);
#endif/*#if (DM_ODM_SUPPORT_TYPE & (ODM_AP))*/
#if (defined(CONFIG_RA_DYNAMIC_RATE_ID))
void
phydm_ra_dynamic_rate_id_on_assoc(
void *dm_void,
u8 wireless_mode,
u8 init_rate_id
);
void
phydm_ra_dynamic_rate_id_init(
void *dm_void
);
void
phydm_update_rate_id(
void *dm_void,
u8 rate,
u8 platform_macid
);
#endif
#endif /*#ifndef __ODMRAINFO_H__*/