RTL88x2BU-Linux-Driver/hal/rtl8822b/rtl8822b_phy.c

2320 lines
65 KiB
C
Raw Normal View History

/******************************************************************************
*
* Copyright(c) 2015 - 2017 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*****************************************************************************/
#define _RTL8822B_PHY_C_
#include <hal_data.h> /* HAL_DATA_TYPE */
#include "../hal_halmac.h" /* rtw_halmac_phy_power_switch() */
#include "rtl8822b.h"
/*
* Description:
* Initialize Register definition offset for Radio Path A/B/C/D
* The initialization value is constant and it should never be changes
*/
static void bb_rf_register_definition(PADAPTER adapter)
{
PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);
/* RF Interface Sowrtware Control */
hal->PHYRegDef[RF_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW;
hal->PHYRegDef[RF_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW;
/* RF Interface Output (and Enable) */
hal->PHYRegDef[RF_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE;
hal->PHYRegDef[RF_PATH_B].rfintfo = rFPGA0_XB_RFInterfaceOE;
/* RF Interface (Output and) Enable */
hal->PHYRegDef[RF_PATH_A].rfintfe = rFPGA0_XA_RFInterfaceOE;
hal->PHYRegDef[RF_PATH_B].rfintfe = rFPGA0_XB_RFInterfaceOE;
hal->PHYRegDef[RF_PATH_A].rf3wireOffset = rA_LSSIWrite_Jaguar;
hal->PHYRegDef[RF_PATH_B].rf3wireOffset = rB_LSSIWrite_Jaguar;
hal->PHYRegDef[RF_PATH_A].rfHSSIPara2 = rHSSIRead_Jaguar;
hal->PHYRegDef[RF_PATH_B].rfHSSIPara2 = rHSSIRead_Jaguar;
/* Tranceiver Readback LSSI/HSPI mode */
hal->PHYRegDef[RF_PATH_A].rfLSSIReadBack = rA_SIRead_Jaguar;
hal->PHYRegDef[RF_PATH_B].rfLSSIReadBack = rB_SIRead_Jaguar;
hal->PHYRegDef[RF_PATH_A].rfLSSIReadBackPi = rA_PIRead_Jaguar;
hal->PHYRegDef[RF_PATH_B].rfLSSIReadBackPi = rB_PIRead_Jaguar;
}
/*
* Description:
* Initialize MAC registers
*
* Return:
* _TRUE Success
* _FALSE Fail
*/
u8 rtl8822b_phy_init_mac_register(PADAPTER adapter)
{
PHAL_DATA_TYPE hal;
u8 ret = _TRUE;
int res;
enum hal_status status;
hal = GET_HAL_DATA(adapter);
ret = _FALSE;
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
res = phy_ConfigMACWithParaFile(adapter, PHY_FILE_MAC_REG);
if (_SUCCESS == res)
ret = _TRUE;
#endif /* CONFIG_LOAD_PHY_PARA_FROM_FILE */
if (_FALSE == ret) {
status = odm_config_mac_with_header_file(&hal->odmpriv);
if (HAL_STATUS_SUCCESS == status)
ret = _TRUE;
}
if (_FALSE == ret)
RTW_INFO("%s: Write MAC Reg Fail!!", __FUNCTION__);
return ret;
}
static u8 _init_bb_reg(PADAPTER Adapter)
{
PHAL_DATA_TYPE hal = GET_HAL_DATA(Adapter);
u8 ret = _TRUE;
int res;
enum hal_status status;
/*
* 1. Read PHY_REG.TXT BB INIT!!
*/
ret = _FALSE;
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
res = phy_ConfigBBWithParaFile(Adapter, PHY_FILE_PHY_REG, CONFIG_BB_PHY_REG);
if (_SUCCESS == res)
ret = _TRUE;
#endif
if (_FALSE == ret) {
status = odm_config_bb_with_header_file(&hal->odmpriv, CONFIG_BB_PHY_REG);
if (HAL_STATUS_SUCCESS == status)
ret = _TRUE;
}
if (_FALSE == ret) {
RTW_INFO("%s: Write BB Reg Fail!!", __FUNCTION__);
goto exit;
}
#if 0 /* No parameter with MP using currently by BB@Stanley. */
/*#ifdef CONFIG_MP_INCLUDED*/
if (Adapter->registrypriv.mp_mode == 1) {
/*
* 1.1 Read PHY_REG_MP.TXT BB INIT!!
*/
ret = _FALSE;
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
res = phy_ConfigBBWithMpParaFile(Adapter, PHY_FILE_PHY_REG_MP);
if (_SUCCESS == res)
ret = _TRUE;
#endif
if (_FALSE == ret) {
status = odm_config_bb_with_header_file(&hal->odmpriv, CONFIG_BB_PHY_REG_MP);
if (HAL_STATUS_SUCCESS == status)
ret = _TRUE;
}
if (_FALSE == ret) {
RTW_INFO("%s: Write BB Reg MP Fail!!", __FUNCTION__);
goto exit;
}
}
#endif /* CONFIG_MP_INCLUDED */
/*
* 2. Read BB AGC table Initialization
*/
ret = _FALSE;
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
res = phy_ConfigBBWithParaFile(Adapter, PHY_FILE_AGC_TAB, CONFIG_BB_AGC_TAB);
if (_SUCCESS == res)
ret = _TRUE;
#endif
if (_FALSE == ret) {
status = odm_config_bb_with_header_file(&hal->odmpriv, CONFIG_BB_AGC_TAB);
if (HAL_STATUS_SUCCESS == status)
ret = _TRUE;
}
if (_FALSE == ret) {
RTW_INFO("%s: Write AGC Table Fail!\n", __FUNCTION__);
goto exit;
}
exit:
return ret;
}
static u8 init_bb_reg(PADAPTER adapter)
{
u8 ret = _TRUE;
PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);
/*
* Config BB and AGC
*/
ret = _init_bb_reg(adapter);
hal_set_crystal_cap(adapter, hal->crystal_cap);
return ret;
}
static u8 _init_rf_reg(PADAPTER adapter)
{
u8 path;
enum rf_path phydm_path;
PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
u8 *regfile;
#endif
enum hal_status status;
int res;
u8 ret = _TRUE;
/*
* Initialize RF
*/
for (path = 0; path < hal->NumTotalRFPath; path++) {
/* Initialize RF from configuration file */
switch (path) {
case 0:
phydm_path = RF_PATH_A;
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
regfile = PHY_FILE_RADIO_A;
#endif
break;
case 1:
phydm_path = RF_PATH_B;
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
regfile = PHY_FILE_RADIO_B;
#endif
break;
default:
RTW_INFO("%s: [WARN] Unknown path=%d, skip!\n", __FUNCTION__, path);
continue;
}
ret = _FALSE;
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
res = PHY_ConfigRFWithParaFile(adapter, regfile, phydm_path);
if (_SUCCESS == res)
ret = _TRUE;
#endif
if (_FALSE == ret) {
status = odm_config_rf_with_header_file(&hal->odmpriv, CONFIG_RF_RADIO, phydm_path);
if (HAL_STATUS_SUCCESS != status)
goto exit;
ret = _TRUE;
}
}
/*
* Configuration of Tx Power Tracking
*/
ret = _FALSE;
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
res = PHY_ConfigRFWithTxPwrTrackParaFile(adapter, PHY_FILE_TXPWR_TRACK);
if (_SUCCESS == res)
ret = _TRUE;
#endif
if (_FALSE == ret) {
status = odm_config_rf_with_tx_pwr_track_header_file(&hal->odmpriv);
if (HAL_STATUS_SUCCESS != status) {
RTW_INFO("%s: Write PwrTrack Table Fail!\n", __FUNCTION__);
goto exit;
}
ret = _TRUE;
}
exit:
return ret;
}
static u8 init_rf_reg(PADAPTER adapter)
{
u8 ret = _TRUE;
ret = _init_rf_reg(adapter);
return ret;
}
/*
* Description:
* Initialize PHY(BB/RF) related functions
*
* Return:
* _TRUE Success
* _FALSE Fail
*/
u8 rtl8822b_phy_init(PADAPTER adapter)
{
struct dvobj_priv *d;
struct dm_struct *phydm;
enum bb_path txpath = BB_PATH_A | BB_PATH_B;
enum bb_path rxpath = BB_PATH_A | BB_PATH_B;
BOOLEAN tx2path;
int err;
u8 ok = _TRUE;
BOOLEAN ret;
d = adapter_to_dvobj(adapter);
phydm = adapter_to_phydm(adapter);
bb_rf_register_definition(adapter);
err = rtw_halmac_phy_power_switch(d, _TRUE);
if (err)
return _FALSE;
ret = config_phydm_parameter_init_8822b(phydm, ODM_PRE_SETTING);
if (FALSE == ret)
return _FALSE;
ok = init_bb_reg(adapter);
if (_FALSE == ok)
return _FALSE;
ok = init_rf_reg(adapter);
if (_FALSE == ok)
return _FALSE;
ret = config_phydm_parameter_init_8822b(phydm, ODM_POST_SETTING);
if (FALSE == ret)
return _FALSE;
rtw_hal_get_rf_path(d, NULL, &txpath, &rxpath);
tx2path = FALSE;
ret = config_phydm_trx_mode_8822b(phydm, txpath, rxpath, tx2path);
if (FALSE == ret)
return _FALSE;
return _TRUE;
}
static void dm_CheckProtection(PADAPTER adapter)
{
}
#ifdef CONFIG_SUPPORT_HW_WPS_PBC
static void dm_CheckPbcGPIO(PADAPTER adapter)
{
u8 tmp1byte;
u8 bPbcPressed = _FALSE;
if (!adapter->registrypriv.hw_wps_pbc)
return;
#ifdef CONFIG_USB_HCI
tmp1byte = rtw_read8(adapter, GPIO_IO_SEL);
tmp1byte |= (HAL_8192C_HW_GPIO_WPS_BIT);
rtw_write8(adapter, GPIO_IO_SEL, tmp1byte); /* enable GPIO[2] as output mode */
tmp1byte &= ~(HAL_8192C_HW_GPIO_WPS_BIT);
rtw_write8(adapter, GPIO_IN, tmp1byte); /* reset the floating voltage level */
tmp1byte = rtw_read8(adapter, GPIO_IO_SEL);
tmp1byte &= ~(HAL_8192C_HW_GPIO_WPS_BIT);
rtw_write8(adapter, GPIO_IO_SEL, tmp1byte); /* enable GPIO[2] as input mode */
tmp1byte = rtw_read8(adapter, GPIO_IN);
if (tmp1byte == 0xff)
return;
if (tmp1byte & HAL_8192C_HW_GPIO_WPS_BIT)
bPbcPressed = _TRUE;
#else
tmp1byte = rtw_read8(adapter, GPIO_IN);
if ((tmp1byte == 0xff) || adapter->init_adpt_in_progress)
return;
if ((tmp1byte & HAL_8192C_HW_GPIO_WPS_BIT) == 0)
bPbcPressed = _TRUE;
#endif
if (_TRUE == bPbcPressed) {
/*
* Here we only set bPbcPressed to true
* After trigger PBC, the variable will be set to false
*/
RTW_INFO("CheckPbcGPIO - PBC is pressed\n");
rtw_request_wps_pbc_event(adapter);
}
}
#endif /* CONFIG_SUPPORT_HW_WPS_PBC */
#ifdef CONFIG_PCI_HCI
/*
* Description:
* Perform interrupt migration dynamically to reduce CPU utilization.
*
* Assumption:
* 1. Do not enable migration under WIFI test.
*/
void dm_InterruptMigration(PADAPTER adapter)
{
PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);
struct mlme_priv *pmlmepriv = &adapter->mlmepriv;
BOOLEAN bCurrentIntMt, bCurrentACIntDisable;
BOOLEAN IntMtToSet = _FALSE;
BOOLEAN ACIntToSet = _FALSE;
/* Retrieve current interrupt migration and Tx four ACs IMR settings first. */
bCurrentIntMt = hal->bInterruptMigration;
bCurrentACIntDisable = hal->bDisableTxInt;
/*
* <Roger_Notes> Currently we use busy traffic for reference instead of RxIntOK counts to prevent non-linear Rx statistics
* when interrupt migration is set before. 2010.03.05.
*/
if (!adapter->registrypriv.wifi_spec
&& (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
&& pmlmepriv->LinkDetectInfo.bHigherBusyTraffic) {
IntMtToSet = _TRUE;
/* To check whether we should disable Tx interrupt or not. */
if (pmlmepriv->LinkDetectInfo.bHigherBusyRxTraffic)
ACIntToSet = _TRUE;
}
/* Update current settings. */
if (bCurrentIntMt != IntMtToSet) {
RTW_INFO("%s: Update interrupt migration(%d)\n", __FUNCTION__, IntMtToSet);
if (IntMtToSet) {
/*
* <Roger_Notes> Set interrupt migration timer and corresponging Tx/Rx counter.
* timer 25ns*0xfa0=100us for 0xf packets.
* 2010.03.05.
*/
rtw_write32(adapter, REG_INT_MIG, 0xff000fa0); /* 0x306:Rx, 0x307:Tx */
hal->bInterruptMigration = IntMtToSet;
} else {
/* Reset all interrupt migration settings. */
rtw_write32(adapter, REG_INT_MIG, 0);
hal->bInterruptMigration = IntMtToSet;
}
}
}
#endif /* CONFIG_PCI_HCI */
/*
* ============================================================
* functions
* ============================================================
*/
static void init_phydm_cominfo(PADAPTER adapter)
{
PHAL_DATA_TYPE hal;
struct dm_struct *p_dm_odm;
u32 support_ability = 0;
u8 cut_ver = ODM_CUT_A, fab_ver = ODM_TSMC;
hal = GET_HAL_DATA(adapter);
p_dm_odm = &hal->odmpriv;
Init_ODM_ComInfo(adapter);
odm_cmn_info_init(p_dm_odm, ODM_CMNINFO_PACKAGE_TYPE, hal->PackageType);
odm_cmn_info_init(p_dm_odm, ODM_CMNINFO_IC_TYPE, ODM_RTL8822B);
if (IS_CHIP_VENDOR_TSMC(hal->version_id))
fab_ver = ODM_TSMC;
else if (IS_CHIP_VENDOR_UMC(hal->version_id))
fab_ver = ODM_UMC;
else if (IS_CHIP_VENDOR_SMIC(hal->version_id))
fab_ver = ODM_UMC + 1;
else
RTW_INFO("%s: unknown fab_ver=%d !!\n",
__FUNCTION__, GET_CVID_MANUFACTUER(hal->version_id));
if (IS_A_CUT(hal->version_id))
cut_ver = ODM_CUT_A;
else if (IS_B_CUT(hal->version_id))
cut_ver = ODM_CUT_B;
else if (IS_C_CUT(hal->version_id))
cut_ver = ODM_CUT_C;
else if (IS_D_CUT(hal->version_id))
cut_ver = ODM_CUT_D;
else if (IS_E_CUT(hal->version_id))
cut_ver = ODM_CUT_E;
else if (IS_F_CUT(hal->version_id))
cut_ver = ODM_CUT_F;
else if (IS_I_CUT(hal->version_id))
cut_ver = ODM_CUT_I;
else if (IS_J_CUT(hal->version_id))
cut_ver = ODM_CUT_J;
else if (IS_K_CUT(hal->version_id))
cut_ver = ODM_CUT_K;
else
RTW_INFO("%s: unknown cut_ver=%d !!\n",
__FUNCTION__, GET_CVID_CUT_VERSION(hal->version_id));
RTW_INFO("%s: fab_ver=%d cut_ver=%d\n", __FUNCTION__, fab_ver, cut_ver);
odm_cmn_info_init(p_dm_odm, ODM_CMNINFO_FAB_VER, fab_ver);
odm_cmn_info_init(p_dm_odm, ODM_CMNINFO_CUT_VER, cut_ver);
}
void rtl8822b_phy_init_dm_priv(PADAPTER adapter)
{
struct dm_struct *podmpriv = adapter_to_phydm(adapter);
init_phydm_cominfo(adapter);
odm_init_all_timers(podmpriv);
}
void rtl8822b_phy_deinit_dm_priv(PADAPTER adapter)
{
struct dm_struct *podmpriv = adapter_to_phydm(adapter);
odm_cancel_all_timers(podmpriv);
}
void rtl8822b_phy_init_haldm(PADAPTER adapter)
{
rtw_phydm_init(adapter);
}
static void check_rxfifo_full(PADAPTER adapter)
{
struct dvobj_priv *psdpriv = adapter->dvobj;
struct debug_priv *pdbgpriv = &psdpriv->drv_dbg;
struct registry_priv *regsty = &adapter->registrypriv;
u8 val8 = 0;
if (regsty->check_hw_status == 1) {
/* switch counter to RX fifo */
val8 = rtw_read8(adapter, REG_RXERR_RPT_8822B + 3);
rtw_write8(adapter, REG_RXERR_RPT_8822B + 3, (val8 | 0xa0));
pdbgpriv->dbg_rx_fifo_last_overflow = pdbgpriv->dbg_rx_fifo_curr_overflow;
pdbgpriv->dbg_rx_fifo_curr_overflow = rtw_read16(adapter, REG_RXERR_RPT_8822B);
pdbgpriv->dbg_rx_fifo_diff_overflow =
pdbgpriv->dbg_rx_fifo_curr_overflow - pdbgpriv->dbg_rx_fifo_last_overflow;
}
}
void rtl8822b_phy_haldm_watchdog(PADAPTER adapter)
{
BOOLEAN bFwCurrentInPSMode = _FALSE;
u8 bFwPSAwake = _TRUE;
#ifdef CONFIG_MP_INCLUDED
/* for MP power tracking */
if ((adapter->registrypriv.mp_mode == 1)
&& (adapter->mppriv.mp_dm == 0))
return;
#endif /* CONFIG_MP_INCLUDED */
if (!rtw_is_hw_init_completed(adapter))
goto skip_dm;
#ifdef CONFIG_LPS
bFwCurrentInPSMode = adapter_to_pwrctl(adapter)->bFwCurrentInPSMode;
rtw_hal_get_hwreg(adapter, HW_VAR_FWLPS_RF_ON, &bFwPSAwake);
#endif /* CONFIG_LPS */
#ifdef CONFIG_P2P_PS
/*
* Fw is under p2p powersaving mode, driver should stop dynamic mechanism.
*/
if (adapter->wdinfo.p2p_ps_mode)
bFwPSAwake = _FALSE;
#endif /* CONFIG_P2P_PS */
if ((rtw_is_hw_init_completed(adapter))
&& ((!bFwCurrentInPSMode) && bFwPSAwake)) {
/* check rx fifo */
check_rxfifo_full(adapter);
/*
* Dynamically switch RTS/CTS protection.
*/
dm_CheckProtection(adapter);
}
#ifdef CONFIG_DISABLE_ODM
goto skip_dm;
#endif
rtw_phydm_watchdog(adapter);
#ifdef CONFIG_BEAMFORMING
#ifdef RTW_BEAMFORMING_VERSION_2
if (check_fwstate(&adapter->mlmepriv, WIFI_STATION_STATE) &&
check_fwstate(&adapter->mlmepriv, _FW_LINKED))
rtw_hal_beamforming_config_csirate(adapter);
#endif
#endif
skip_dm:
/*
* Check GPIO to determine current RF on/off and Pbc status.
* Check Hardware Radio ON/OFF or not
*/
#ifdef CONFIG_SUPPORT_HW_WPS_PBC
dm_CheckPbcGPIO(adapter);
#else /* !CONFIG_SUPPORT_HW_WPS_PBC */
return;
#endif /* !CONFIG_SUPPORT_HW_WPS_PBC */
}
static u32 phy_calculatebitshift(u32 mask)
{
u32 i;
for (i = 0; i <= 31; i++)
if (mask & BIT(i))
break;
return i;
}
u32 rtl8822b_read_bb_reg(PADAPTER adapter, u32 addr, u32 mask)
{
u32 val = 0, val_org, shift;
#if (DISABLE_BB_RF == 1)
return 0;
#endif
val_org = rtw_read32(adapter, addr);
shift = phy_calculatebitshift(mask);
val = (val_org & mask) >> shift;
return val;
}
void rtl8822b_write_bb_reg(PADAPTER adapter, u32 addr, u32 mask, u32 val)
{
u32 val_org, shift;
#if (DISABLE_BB_RF == 1)
return;
#endif
if (mask != 0xFFFFFFFF) {
/* not "double word" write */
val_org = rtw_read32(adapter, addr);
shift = phy_calculatebitshift(mask);
val = ((val_org & (~mask)) | ((val << shift) & mask));
}
rtw_write32(adapter, addr, val);
}
u32 rtl8822b_read_rf_reg(PADAPTER adapter, enum rf_path path, u32 addr, u32 mask)
{
struct dm_struct *phydm = adapter_to_phydm(adapter);
u32 val;
val = config_phydm_read_rf_reg_8822b(phydm, path, addr, mask);
if (!config_phydm_read_rf_check_8822b(val))
RTW_INFO(FUNC_ADPT_FMT ": read RF reg path=%d addr=0x%x mask=0x%x FAIL!\n",
FUNC_ADPT_ARG(adapter), path, addr, mask);
return val;
}
void rtl8822b_write_rf_reg(PADAPTER adapter, enum rf_path path, u32 addr, u32 mask, u32 val)
{
struct dm_struct *phydm = adapter_to_phydm(adapter);
u8 ret;
ret = config_phydm_write_rf_reg_8822b(phydm, path, addr, mask, val);
if (_FALSE == ret)
RTW_INFO(FUNC_ADPT_FMT ": write RF reg path=%d addr=0x%x mask=0x%x val=0x%x FAIL!\n",
FUNC_ADPT_ARG(adapter), path, addr, mask, val);
}
static void set_tx_power_level_by_path(PADAPTER adapter, u8 channel, u8 path)
{
phy_set_tx_power_index_by_rate_section(adapter, path, channel, CCK);
phy_set_tx_power_index_by_rate_section(adapter, path, channel, OFDM);
phy_set_tx_power_index_by_rate_section(adapter, path, channel, HT_MCS0_MCS7);
phy_set_tx_power_index_by_rate_section(adapter, path, channel, HT_MCS8_MCS15);
phy_set_tx_power_index_by_rate_section(adapter, path, channel, VHT_1SSMCS0_1SSMCS9);
phy_set_tx_power_index_by_rate_section(adapter, path, channel, VHT_2SSMCS0_2SSMCS9);
}
void rtl8822b_set_tx_power_level(PADAPTER adapter, u8 channel)
{
PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);
struct dm_struct *phydm;
struct phydm_fat_struct *p_dm_fat_table;
u8 path = RF_PATH_A;
hal = GET_HAL_DATA(adapter);
phydm = &hal->odmpriv;
p_dm_fat_table = &phydm->dm_fat_table;
if (hal->AntDivCfg) {
/* antenna diversity Enable */
path = (p_dm_fat_table->rx_idle_ant == MAIN_ANT) ? RF_PATH_A : RF_PATH_B;
set_tx_power_level_by_path(adapter, channel, path);
} else {
/* antenna diversity disable */
for (path = RF_PATH_A; path < hal->NumTotalRFPath; ++path)
set_tx_power_level_by_path(adapter, channel, path);
}
}
void rtl8822b_get_tx_power_level(PADAPTER adapter, s32 *power)
{
}
/*
* Parameters:
* padatper
* powerindex power index for rate
* rfpath Antenna(RF) path, type "enum rf_path"
* rate data rate, type "enum MGN_RATE"
*/
void rtl8822b_set_tx_power_index(PADAPTER adapter, u32 powerindex, enum rf_path rfpath, u8 rate)
{
struct dm_struct *phydm = adapter_to_phydm(adapter);
u8 shift = 0;
static u32 index = 0;
rate = PHY_GetRateIndexOfTxPowerByRate(rate);
/*
* For 8822B, phydm api use 4 bytes txagc value
* driver must combine every four 1 byte to one 4 byte and send to phydm api
*/
shift = rate % 4;
index |= ((powerindex & 0xff) << (shift * 8));
if (shift == 3) {
rate = rate - 3;
if (!config_phydm_write_txagc_8822b(phydm, index, rfpath, rate)) {
RTW_INFO("%s(index:%d, rfpath:%d, rate:0x%02x, disable api:%d) fail\n",
__FUNCTION__, index, rfpath, rate, phydm->is_disable_phy_api);
rtw_warn_on(1);
}
index = 0;
}
}
static u8 rtl8822b_phy_get_current_tx_num(PADAPTER adapter, u8 rate)
{
u8 tx_num = 0;
if ((rate >= MGN_MCS8 && rate <= MGN_MCS15) ||
(rate >= MGN_VHT2SS_MCS0 && rate <= MGN_VHT2SS_MCS9))
tx_num = RF_2TX;
else
tx_num = RF_1TX;
return tx_num;
}
/*
* Parameters:
* padatper
* rfpath Antenna(RF) path, type "enum rf_path"
* rate data rate, type "enum MGN_RATE"
* bandwidth Bandwidth, type "enum _CHANNEL_WIDTH"
* channel Channel number
*
* Rteurn:
* tx_power power index for rate
*/
u8 rtl8822b_get_tx_power_index(PADAPTER adapter, enum rf_path rfpath, u8 rate, u8 bandwidth, u8 channel, struct txpwr_idx_comp *tic)
{
PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);
s16 power_idx;
u8 base_idx = 0;
s8 by_rate_diff = 0, limit = 0, tpt_offset = 0, extra_bias = 0;
u8 ntx_idx = rtl8822b_phy_get_current_tx_num(adapter, rate);
u8 bIn24G = _FALSE;
base_idx = PHY_GetTxPowerIndexBase(adapter, rfpath, rate, ntx_idx, bandwidth, channel, &bIn24G);
by_rate_diff = PHY_GetTxPowerByRate(adapter, (u8)(!bIn24G), rfpath, rate);
limit = PHY_GetTxPowerLimit(adapter, NULL, (BAND_TYPE)(!bIn24G),
hal->current_channel_bw, rfpath, rate, ntx_idx, hal->current_channel);
/* tpt_offset += PHY_GetTxPowerTrackingOffset(adapter, rfpath, rate); */
if (tic) {
tic->ntx_idx = ntx_idx;
tic->base = base_idx;
tic->by_rate = by_rate_diff;
tic->limit = limit;
tic->tpt = tpt_offset;
tic->ebias = extra_bias;
}
by_rate_diff = by_rate_diff > limit ? limit : by_rate_diff;
power_idx = base_idx + by_rate_diff + tpt_offset + extra_bias;
#if 0
#if CCX_SUPPORT
CCX_CellPowerLimit(adapter, channel, rate, (pu1Byte)&power_idx);
#endif
#endif
if (power_idx < 0)
power_idx = 0;
else if (power_idx > MAX_POWER_INDEX)
power_idx = MAX_POWER_INDEX;
return power_idx;
}
/*
* Description:
* Check need to switch band or not
* Parameters:
* channelToSW channel wiii be switch to
* Return:
* _TRUE need to switch band
* _FALSE not need to switch band
*/
static u8 need_switch_band(PADAPTER adapter, u8 channelToSW)
{
u8 u1tmp = 0;
u8 ret_value = _TRUE;
u8 Band = BAND_ON_5G, BandToSW = BAND_ON_5G;
PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);
Band = hal->current_band_type;
/* Use current swich channel to judge Band Type and switch Band if need */
if (channelToSW > 14)
BandToSW = BAND_ON_5G;
else
BandToSW = BAND_ON_2_4G;
if (BandToSW != Band) {
/* record current band type for other hal use */
hal->current_band_type = (BAND_TYPE)BandToSW;
ret_value = _TRUE;
} else
ret_value = _FALSE;
return ret_value;
}
static u8 get_pri_ch_id(PADAPTER adapter)
{
u8 pri_ch_idx = 0;
PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);
if (hal->current_channel_bw == CHANNEL_WIDTH_80) {
/* primary channel is at lower subband of 80MHz & 40MHz */
if ((hal->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER) && (hal->nCur80MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER))
pri_ch_idx = VHT_DATA_SC_20_LOWEST_OF_80MHZ;
/* primary channel is at lower subband of 80MHz & upper subband of 40MHz */
else if ((hal->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_UPPER) && (hal->nCur80MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER))
pri_ch_idx = VHT_DATA_SC_20_LOWER_OF_80MHZ;
/* primary channel is at upper subband of 80MHz & lower subband of 40MHz */
else if ((hal->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER) && (hal->nCur80MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_UPPER))
pri_ch_idx = VHT_DATA_SC_20_UPPER_OF_80MHZ;
/* primary channel is at upper subband of 80MHz & upper subband of 40MHz */
else if ((hal->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_UPPER) && (hal->nCur80MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_UPPER))
pri_ch_idx = VHT_DATA_SC_20_UPPERST_OF_80MHZ;
else {
if (hal->nCur80MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER)
pri_ch_idx = VHT_DATA_SC_40_LOWER_OF_80MHZ;
else if (hal->nCur80MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_UPPER)
pri_ch_idx = VHT_DATA_SC_40_UPPER_OF_80MHZ;
else
RTW_INFO("SCMapping: DONOT CARE Mode Setting\n");
}
} else if (hal->current_channel_bw == CHANNEL_WIDTH_40) {
/* primary channel is at upper subband of 40MHz */
if (hal->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_UPPER)
pri_ch_idx = VHT_DATA_SC_20_UPPER_OF_80MHZ;
/* primary channel is at lower subband of 40MHz */
else if (hal->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER)
pri_ch_idx = VHT_DATA_SC_20_LOWER_OF_80MHZ;
else
RTW_INFO("SCMapping: DONOT CARE Mode Setting\n");
}
return pri_ch_idx;
}
static void mac_switch_bandwidth(PADAPTER adapter, u8 pri_ch_idx)
{
u8 channel = 0, bw = 0;
PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);
int err;
channel = hal->current_channel;
bw = hal->current_channel_bw;
err = rtw_halmac_set_bandwidth(adapter_to_dvobj(adapter), channel, pri_ch_idx, bw);
if (err) {
RTW_INFO(FUNC_ADPT_FMT ": (channel=%d, pri_ch_idx=%d, bw=%d) fail\n",
FUNC_ADPT_ARG(adapter), channel, pri_ch_idx, bw);
}
}
static void switch_chnl_and_set_bw_by_drv(PADAPTER adapter, u8 switch_band)
{
PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);
struct dm_struct *p_dm_odm = &hal->odmpriv;
u8 center_ch = 0, ret = 0;
/* set channel & Bandwidth register */
/* 1. set switch band register if need to switch band */
if (switch_band) {
/* hal->current_channel is center channel of pmlmeext->cur_channel(primary channel) */
ret = config_phydm_switch_band_8822b(p_dm_odm, hal->current_channel);
if (!ret) {
RTW_INFO("%s: config_phydm_switch_band_8822b fail\n", __FUNCTION__);
rtw_warn_on(1);
return;
}
}
/* 2. set channel register */
if (hal->bSwChnl) {
ret = config_phydm_switch_channel_8822b(p_dm_odm, hal->current_channel);
hal->bSwChnl = _FALSE;
if (!ret) {
RTW_INFO("%s: config_phydm_switch_channel_8822b fail\n", __FUNCTION__);
rtw_warn_on(1);
return;
}
}
/* 3. set Bandwidth register */
if (hal->bSetChnlBW) {
/* get primary channel index */
u8 pri_ch_idx = get_pri_ch_id(adapter);
/* 3.1 set MAC register */
mac_switch_bandwidth(adapter, pri_ch_idx);
/* 3.2 set BB/RF registet */
ret = config_phydm_switch_bandwidth_8822b(p_dm_odm, pri_ch_idx, hal->current_channel_bw);
hal->bSetChnlBW = _FALSE;
if (!ret) {
RTW_INFO("%s: config_phydm_switch_bandwidth_8822b fail\n", __FUNCTION__);
rtw_warn_on(1);
return;
}
}
}
#ifdef RTW_CHANNEL_SWITCH_OFFLOAD
static void switch_chnl_and_set_bw_by_fw(PADAPTER adapter, u8 switch_band)
{
PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);
if (switch_band ||hal->bSwChnl || hal->bSetChnlBW) {
rtw_hal_switch_chnl_and_set_bw_offload(adapter,
hal->current_channel, get_pri_ch_id(adapter), hal->current_channel_bw);
hal->bSwChnl = _FALSE;
hal->bSetChnlBW = _FALSE;
}
}
#endif
/*
* Description:
* Set channel & bandwidth & offset
*/
void rtl8822b_switch_chnl_and_set_bw(PADAPTER adapter)
{
PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);
struct dm_struct *p_dm_odm = &hal->odmpriv;
u8 center_ch = 0, ret = 0, switch_band = _FALSE;
if (adapter->bNotifyChannelChange) {
RTW_INFO("[%s] bSwChnl=%d, ch=%d, bSetChnlBW=%d, bw=%d\n",
__FUNCTION__,
hal->bSwChnl,
hal->current_channel,
hal->bSetChnlBW,
hal->current_channel_bw);
}
if (RTW_CANNOT_RUN(adapter)) {
hal->bSwChnlAndSetBWInProgress = _FALSE;
return;
}
switch_band = need_switch_band(adapter, hal->current_channel);
/* config channel, bw, offset setting */
#ifdef RTW_CHANNEL_SWITCH_OFFLOAD
if (hal->ch_switch_offload)
switch_chnl_and_set_bw_by_fw(adapter, switch_band);
else
switch_chnl_and_set_bw_by_drv(adapter, switch_band);
#else
switch_chnl_and_set_bw_by_drv(adapter, switch_band);
#endif /* RTW_CHANNEL_SWITCH_OFFLOAD */
/* config coex setting */
if (switch_band) {
#ifdef CONFIG_BT_COEXIST
if (hal->EEPROMBluetoothCoexist) {
struct mlme_ext_priv *mlmeext;
/* switch band under site survey or not, must notify to BT COEX */
mlmeext = &adapter->mlmeextpriv;
if (mlmeext_scan_state(mlmeext) != SCAN_DISABLE)
rtw_btcoex_switchband_notify(_TRUE, hal->current_band_type);
else
rtw_btcoex_switchband_notify(_FALSE, hal->current_band_type);
} else
rtw_btcoex_wifionly_switchband_notify(adapter);
#else /* !CONFIG_BT_COEXIST */
rtw_btcoex_wifionly_switchband_notify(adapter);
#endif /* CONFIG_BT_COEXIST */
}
/* <2016/03/09> ** This Setting is for MP Driver Only*/
#ifdef CONFIG_MP_INCLUDED
if (adapter->registrypriv.mp_mode == _TRUE) {
/* <2016/02/25, VincentL> Add for 8822B Antenna Binding between "2.4G-WiFi"
And between "5G-BT", Suggested by RF SzuyiTsai*/
if (hal->current_channel <= 14) /* 2.4G*/
phy_set_rf_path_switch_8822b(p_dm_odm, 1); /*To WiFi-2.4G*/
else /* 5G */
phy_set_rf_path_switch_8822b(p_dm_odm, 0); /*To BT-5G*/
}
#endif
phydm_config_kfree(p_dm_odm, hal->current_channel);
/* TX Power Setting */
odm_clear_txpowertracking_state(p_dm_odm);
rtw_hal_set_tx_power_level(adapter, hal->current_channel);
/* IQK */
if ((hal->bNeedIQK == _TRUE)
|| (adapter->registrypriv.mp_mode == 1)) {
/*phy_iq_calibrate_8822b(p_dm_odm, _FALSE);*/
rtw_phydm_iqk_trigger(adapter);
hal->bNeedIQK = _FALSE;
}
}
/*
* Description:
* Store channel setting to hal date
* Parameters:
* bSwitchChannel swith channel or not
* bSetBandWidth set band or not
* ChannelNum center channel
* ChnlWidth bandwidth
* ChnlOffsetOf40MHz channel offset for 40MHz Bandwidth
* ChnlOffsetOf80MHz channel offset for 80MHz Bandwidth
* CenterFrequencyIndex1 center channel index
*/
void rtl8822b_handle_sw_chnl_and_set_bw(
PADAPTER Adapter, u8 bSwitchChannel, u8 bSetBandWidth,
u8 ChannelNum, enum channel_width ChnlWidth, u8 ChnlOffsetOf40MHz,
u8 ChnlOffsetOf80MHz, u8 CenterFrequencyIndex1)
{
PADAPTER pDefAdapter = GetDefaultAdapter(Adapter);
PHAL_DATA_TYPE hal = GET_HAL_DATA(pDefAdapter);
u8 tmpChannel = hal->current_channel;
enum channel_width tmpBW = hal->current_channel_bw;
u8 tmpnCur40MhzPrimeSC = hal->nCur40MhzPrimeSC;
u8 tmpnCur80MhzPrimeSC = hal->nCur80MhzPrimeSC;
u8 tmpCenterFrequencyIndex1 = hal->CurrentCenterFrequencyIndex1;
struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv;
/* check swchnl or setbw */
if (!bSwitchChannel && !bSetBandWidth) {
RTW_INFO("%s: not switch channel and not set bandwidth\n", __FUNCTION__);
return;
}
/* skip switch channel operation for current channel & ChannelNum(will be switch) are the same */
if (bSwitchChannel) {
if (hal->current_channel != ChannelNum) {
if (HAL_IsLegalChannel(Adapter, ChannelNum))
hal->bSwChnl = _TRUE;
else
return;
}
}
/* check set BandWidth */
if (bSetBandWidth) {
/* initial channel bw setting */
if (hal->bChnlBWInitialized == _FALSE) {
hal->bChnlBWInitialized = _TRUE;
hal->bSetChnlBW = _TRUE;
} else if ((hal->current_channel_bw != ChnlWidth) || /* check whether need set band or not */
(hal->nCur40MhzPrimeSC != ChnlOffsetOf40MHz) ||
(hal->nCur80MhzPrimeSC != ChnlOffsetOf80MHz) ||
(hal->CurrentCenterFrequencyIndex1 != CenterFrequencyIndex1))
hal->bSetChnlBW = _TRUE;
}
/* return if not need set bandwidth nor channel after check*/
if (!hal->bSetChnlBW && !hal->bSwChnl && hal->bNeedIQK != _TRUE)
return;
/* set channel number to hal data */
if (hal->bSwChnl) {
hal->current_channel = ChannelNum;
hal->CurrentCenterFrequencyIndex1 = ChannelNum;
}
/* set bandwidth info to hal data */
if (hal->bSetChnlBW) {
hal->current_channel_bw = ChnlWidth;
hal->nCur40MhzPrimeSC = ChnlOffsetOf40MHz;
hal->nCur80MhzPrimeSC = ChnlOffsetOf80MHz;
hal->CurrentCenterFrequencyIndex1 = CenterFrequencyIndex1;
}
/* switch channel & bandwidth */
if (!RTW_CANNOT_RUN(Adapter))
rtl8822b_switch_chnl_and_set_bw(Adapter);
else {
if (hal->bSwChnl) {
hal->current_channel = tmpChannel;
hal->CurrentCenterFrequencyIndex1 = tmpChannel;
}
if (hal->bSetChnlBW) {
hal->current_channel_bw = tmpBW;
hal->nCur40MhzPrimeSC = tmpnCur40MhzPrimeSC;
hal->nCur80MhzPrimeSC = tmpnCur80MhzPrimeSC;
hal->CurrentCenterFrequencyIndex1 = tmpCenterFrequencyIndex1;
}
}
}
/*
* Description:
* Change channel, bandwidth & offset
* Parameters:
* center_ch center channel
* bw bandwidth
* offset40 channel offset for 40MHz Bandwidth
* offset80 channel offset for 80MHz Bandwidth
*/
void rtl8822b_set_channel_bw(PADAPTER adapter, u8 center_ch, enum channel_width bw, u8 offset40, u8 offset80)
{
rtl8822b_handle_sw_chnl_and_set_bw(adapter, _TRUE, _TRUE, center_ch, bw, offset40, offset80, center_ch);
}
void rtl8822b_notch_filter_switch(PADAPTER adapter, bool enable)
{
if (enable)
RTW_INFO("%s: Enable notch filter\n", __FUNCTION__);
else
RTW_INFO("%s: Disable notch filter\n", __FUNCTION__);
}
#ifdef CONFIG_MP_INCLUDED
/*
* Description:
* Config RF path
*
* Parameters:
* adapter pointer of struct _ADAPTER
*/
void rtl8822b_mp_config_rfpath(PADAPTER adapter)
{
PHAL_DATA_TYPE hal;
PMPT_CONTEXT mpt;
ANTENNA_PATH anttx, antrx;
enum bb_path bb_tx, bb_rx;
hal = GET_HAL_DATA(adapter);
mpt = &adapter->mppriv.mpt_ctx;
anttx = hal->antenna_tx_path;
antrx = hal->AntennaRxPath;
hal->antenna_test = _TRUE;
RTW_INFO("+Config RF Path, tx=0x%x rx=0x%x\n", anttx, antrx);
switch (anttx) {
case ANTENNA_A:
mpt->mpt_rf_path = RF_PATH_A;
bb_tx = BB_PATH_A;
break;
case ANTENNA_B:
mpt->mpt_rf_path = RF_PATH_B;
bb_tx = BB_PATH_B;
break;
case ANTENNA_AB:
default:
mpt->mpt_rf_path = RF_PATH_AB;
bb_tx = BB_PATH_A | BB_PATH_B;
break;
}
switch (antrx) {
case ANTENNA_A:
bb_rx = BB_PATH_A;
break;
case ANTENNA_B:
bb_rx = BB_PATH_B;
break;
case ANTENNA_AB:
default:
bb_rx = BB_PATH_A | BB_PATH_B;
break;
}
config_phydm_trx_mode_8822b(GET_PDM_ODM(adapter), bb_tx, bb_rx, FALSE);
RTW_INFO("-Config RF Path Finish\n");
}
#endif /* CONFIG_MP_INCLUDED */
#ifdef CONFIG_BEAMFORMING
/* REG_TXBF_CTRL (Offset 0x42C) */
#define BITS_R_TXBF1_AID_8822B (BIT_MASK_R_TXBF1_AID_8822B << BIT_SHIFT_R_TXBF1_AID_8822B)
#define BIT_CLEAR_R_TXBF1_AID_8822B(x) ((x) & (~BITS_R_TXBF1_AID_8822B))
#define BIT_SET_R_TXBF1_AID_8822B(x, v) (BIT_CLEAR_R_TXBF1_AID_8822B(x) | BIT_R_TXBF1_AID_8822B(v))
#define BITS_R_TXBF0_AID_8822B (BIT_MASK_R_TXBF0_AID_8822B << BIT_SHIFT_R_TXBF0_AID_8822B)
#define BIT_CLEAR_R_TXBF0_AID_8822B(x) ((x) & (~BITS_R_TXBF0_AID_8822B))
#define BIT_SET_R_TXBF0_AID_8822B(x, v) (BIT_CLEAR_R_TXBF0_AID_8822B(x) | BIT_R_TXBF0_AID_8822B(v))
/* REG_NDPA_OPT_CTRL (Offset 0x45F) */
#define BITS_R_NDPA_BW_8822B (BIT_MASK_R_NDPA_BW_8822B << BIT_SHIFT_R_NDPA_BW_8822B)
#define BIT_CLEAR_R_NDPA_BW_8822B(x) ((x) & (~BITS_R_NDPA_BW_8822B))
#define BIT_SET_R_NDPA_BW_8822B(x, v) (BIT_CLEAR_R_NDPA_BW_8822B(x) | BIT_R_NDPA_BW_8822B(v))
/* REG_ASSOCIATED_BFMEE_SEL (Offset 0x714) */
#define BITS_AID1_8822B (BIT_MASK_AID1_8822B << BIT_SHIFT_AID1_8822B)
#define BIT_CLEAR_AID1_8822B(x) ((x) & (~BITS_AID1_8822B))
#define BIT_SET_AID1_8822B(x, v) (BIT_CLEAR_AID1_8822B(x) | BIT_AID1_8822B(v))
#define BITS_AID0_8822B (BIT_MASK_AID0_8822B << BIT_SHIFT_AID0_8822B)
#define BIT_CLEAR_AID0_8822B(x) ((x) & (~BITS_AID0_8822B))
#define BIT_SET_AID0_8822B(x, v) (BIT_CLEAR_AID0_8822B(x) | BIT_AID0_8822B(v))
/* REG_SND_PTCL_CTRL (Offset 0x718) */
#define BIT_VHTNDP_RPTPOLL_CSI_STR_OFFSET_SEL_8822B BIT(15)
/* REG_MU_TX_CTL (Offset 0x14C0) */
#define BIT_R_MU_P1_WAIT_STATE_EN_8822B BIT(16)
#define BIT_SHIFT_R_MU_RL_8822B 12
#define BIT_MASK_R_MU_RL_8822B 0xF
#define BITS_R_MU_RL_8822B (BIT_MASK_R_MU_RL_8822B << BIT_SHIFT_R_MU_RL_8822B)
#define BIT_R_MU_RL_8822B(x) (((x) & BIT_MASK_R_MU_RL_8822B) << BIT_SHIFT_R_MU_RL_8822B)
#define BIT_CLEAR_R_MU_RL_8822B(x) ((x) & (~BITS_R_MU_RL_8822B))
#define BIT_SET_R_MU_RL_8822B(x, v) (BIT_CLEAR_R_MU_RL_8822B(x) | BIT_R_MU_RL_8822B(v))
#define BIT_SHIFT_R_MU_TAB_SEL_8822B 8
#define BIT_MASK_R_MU_TAB_SEL_8822B 0x7
#define BITS_R_MU_TAB_SEL_8822B (BIT_MASK_R_MU_TAB_SEL_8822B << BIT_SHIFT_R_MU_TAB_SEL_8822B)
#define BIT_R_MU_TAB_SEL_8822B(x) (((x) & BIT_MASK_R_MU_TAB_SEL_8822B) << BIT_SHIFT_R_MU_TAB_SEL_8822B)
#define BIT_CLEAR_R_MU_TAB_SEL_8822B(x) ((x) & (~BITS_R_MU_TAB_SEL_8822B))
#define BIT_SET_R_MU_TAB_SEL_8822B(x, v) (BIT_CLEAR_R_MU_TAB_SEL_8822B(x) | BIT_R_MU_TAB_SEL_8822B(v))
#define BIT_R_EN_MU_MIMO_8822B BIT(7)
#define BITS_R_MU_TABLE_VALID_8822B (BIT_MASK_R_MU_TABLE_VALID_8822B << BIT_SHIFT_R_MU_TABLE_VALID_8822B)
#define BIT_CLEAR_R_MU_TABLE_VALID_8822B(x) ((x) & (~BITS_R_MU_TABLE_VALID_8822B))
#define BIT_SET_R_MU_TABLE_VALID_8822B(x, v) (BIT_CLEAR_R_MU_TABLE_VALID_8822B(x) | BIT_R_MU_TABLE_VALID_8822B(v))
/* REG_WMAC_MU_BF_CTL (Offset 0x1680) */
#define BITS_WMAC_MU_BFRPTSEG_SEL_8822B (BIT_MASK_WMAC_MU_BFRPTSEG_SEL_8822B << BIT_SHIFT_WMAC_MU_BFRPTSEG_SEL_8822B)
#define BIT_CLEAR_WMAC_MU_BFRPTSEG_SEL_8822B(x) ((x) & (~BITS_WMAC_MU_BFRPTSEG_SEL_8822B))
#define BIT_SET_WMAC_MU_BFRPTSEG_SEL_8822B(x, v) (BIT_CLEAR_WMAC_MU_BFRPTSEG_SEL_8822B(x) | BIT_WMAC_MU_BFRPTSEG_SEL_8822B(v))
#define BITS_WMAC_MU_BF_MYAID_8822B (BIT_MASK_WMAC_MU_BF_MYAID_8822B << BIT_SHIFT_WMAC_MU_BF_MYAID_8822B)
#define BIT_CLEAR_WMAC_MU_BF_MYAID_8822B(x) ((x) & (~BITS_WMAC_MU_BF_MYAID_8822B))
#define BIT_SET_WMAC_MU_BF_MYAID_8822B(x, v) (BIT_CLEAR_WMAC_MU_BF_MYAID_8822B(x) | BIT_WMAC_MU_BF_MYAID_8822B(v))
/* REG_WMAC_ASSOCIATED_MU_BFMEE7 (Offset 0x168E) */
#define BIT_STATUS_BFEE7_8822B BIT(10)
enum _HW_CFG_SOUNDING_TYPE {
HW_CFG_SOUNDING_TYPE_SOUNDDOWN,
HW_CFG_SOUNDING_TYPE_LEAVE,
HW_CFG_SOUNDING_TYPE_RESET,
HW_CFG_SOUNDING_TYPE_MAX
};
static u8 _bf_get_nrx(PADAPTER adapter)
{
u8 rf;
u8 nrx = 0;
rtw_hal_get_hwreg(adapter, HW_VAR_RF_TYPE, &rf);
switch (rf) {
case RF_1T1R:
nrx = 0;
break;
default:
case RF_1T2R:
case RF_2T2R:
nrx = 1;
break;
}
return nrx;
}
static void _sounding_reset_all(PADAPTER adapter)
{
struct beamforming_info *info;
struct beamformee_entry *bfee;
u8 i;
u32 mu_tx_ctl;
info = GET_BEAMFORM_INFO(adapter);
rtw_write8(adapter, REG_TXBF_CTRL_8822B+3, 0);
/* Clear all MU entry table */
for (i = 0; i < MAX_BEAMFORMEE_ENTRY_NUM; i++) {
bfee = &info->bfee_entry[i];
for (i = 0; i < 8; i++)
bfee->gid_valid[i] = 0;
}
mu_tx_ctl = rtw_read32(adapter, REG_MU_TX_CTL_8822B);
for (i = 0; i < 6; i++) {
mu_tx_ctl = BIT_SET_R_MU_TAB_SEL_8822B(mu_tx_ctl, i);
rtw_write32(adapter, REG_MU_TX_CTL_8822B, mu_tx_ctl);
/* set MU STA gid valid table */
rtw_write32(adapter, REG_MU_STA_GID_VLD_8822B, 0);
}
/* Disable TxMU PPDU */
mu_tx_ctl &= ~BIT_R_EN_MU_MIMO_8822B;
rtw_write32(adapter, REG_MU_TX_CTL_8822B, mu_tx_ctl);
}
static void _sounding_config_su(PADAPTER adapter, struct beamformee_entry *bfee, enum _HW_CFG_SOUNDING_TYPE cfg_type)
{
u32 txbf_ctrl, new_ctrl;
txbf_ctrl = rtw_read32(adapter, REG_TXBF_CTRL_8822B);
new_ctrl = txbf_ctrl;
/* Clear TxBF status at 20M/40/80M first */
switch (bfee->su_reg_index) {
case 0:
new_ctrl &= ~(BIT_R_TXBF0_20M_8822B|BIT_R_TXBF0_40M_8822B|BIT_R_TXBF0_80M_8822B);
break;
case 1:
new_ctrl &= ~(BIT_R_TXBF1_20M_8822B|BIT_R_TXBF1_40M_8822B|BIT_R_TXBF1_80M_8822B);
break;
}
switch (cfg_type) {
case HW_CFG_SOUNDING_TYPE_SOUNDDOWN:
switch (bfee->sound_bw) {
default:
case CHANNEL_WIDTH_80:
if (0 == bfee->su_reg_index)
new_ctrl |= BIT_R_TXBF0_80M_8822B;
else if (1 == bfee->su_reg_index)
new_ctrl |= BIT_R_TXBF1_80M_8822B;
/* fall through */
case CHANNEL_WIDTH_40:
if (0 == bfee->su_reg_index)
new_ctrl |= BIT_R_TXBF0_40M_8822B;
else if (1 == bfee->su_reg_index)
new_ctrl |= BIT_R_TXBF1_40M_8822B;
/* fall through */
case CHANNEL_WIDTH_20:
if (0 == bfee->su_reg_index)
new_ctrl |= BIT_R_TXBF0_20M_8822B;
else if (1 == bfee->su_reg_index)
new_ctrl |= BIT_R_TXBF1_20M_8822B;
break;
}
break;
default:
RTW_INFO("%s: SU cfg_type=%d, don't apply Vmatrix!\n", __FUNCTION__, cfg_type);
break;
}
if (new_ctrl != txbf_ctrl)
rtw_write32(adapter, REG_TXBF_CTRL_8822B, new_ctrl);
}
static void _sounding_config_mu(PADAPTER adapter, struct beamformee_entry *bfee, enum _HW_CFG_SOUNDING_TYPE cfg_type)
{
struct beamforming_info *info;
u8 is_bitmap_ready = _FALSE;
u32 mu_tx_ctl;
u16 bitmap;
u8 id1, id0, gid;
u32 gid_valid[6] = {0};
u8 i, j;
u32 val32;
info = GET_BEAMFORM_INFO(adapter);
switch (cfg_type) {
case HW_CFG_SOUNDING_TYPE_LEAVE:
RTW_INFO("%s: MU HW_CFG_SOUNDING_TYPE_LEAVE\n", __FUNCTION__);
/* Clear the entry table */
mu_tx_ctl = rtw_read32(adapter, REG_MU_TX_CTL_8822B);
if (TEST_FLAG(bfee->cap, BEAMFORMEE_CAP_VHT_MU)) {
for (i = 0; i < 8; i++)
bfee->gid_valid[i] = 0;
mu_tx_ctl = BIT_SET_R_MU_TAB_SEL_8822B(mu_tx_ctl, bfee->mu_reg_index);
rtw_write32(adapter, REG_MU_TX_CTL_8822B, mu_tx_ctl);
/* Set MU STA gid valid table */
rtw_write32(adapter, REG_MU_STA_GID_VLD_8822B, 0);
} else {
RTW_ERR("%s: ERROR! It is not an MU BFee entry!!\n", __FUNCTION__);
}
if (info->beamformee_su_cnt == 0) {
/* Disable TxMU PPDU */
mu_tx_ctl &= ~BIT_R_EN_MU_MIMO_8822B;
rtw_write32(adapter, REG_MU_TX_CTL_8822B, mu_tx_ctl);
}
break;
case HW_CFG_SOUNDING_TYPE_SOUNDDOWN:
RTW_INFO("%s: MU HW_CFG_SOUNDING_TYPE_SOUNDDOWN\n", __FUNCTION__);
/* Update all MU entry table */
i = 0;
do {
/* Check BB GID bitmap ready */
val32 = phy_query_bb_reg(adapter, 0xF4C, 0xFFFF0000);
is_bitmap_ready = (val32 & BIT(15)) ? _TRUE : _FALSE;
i++;
rtw_udelay_os(5);
} while ((_FALSE == is_bitmap_ready) && (i < 100));
bitmap = (u16)(val32 & 0x3FFF);
for (i = 0; i < 15; i++) {
if (i < 5) {
/* bit0~4 */
id0 = 0;
id1 = i + 1;
} else if (i < 9) {
/* bit5~8 */
id0 = 1;
id1 = i - 3;
} else if (i < 12) {
/* bit9~11 */
id0 = 2;
id1 = i - 6;
} else if (i < 14) {
/* bit12~13 */
id0 = 3;
id1 = i - 8;
} else {
/* bit14 */
id0 = 4;
id1 = i - 9;
}
if (bitmap & BIT(i)) {
/* Pair 1 */
gid = (i << 1) + 1;
gid_valid[id0] |= (BIT(gid));
gid_valid[id1] |= (BIT(gid));
/* Pair 2 */
gid += 1;
gid_valid[id0] |= (BIT(gid));
gid_valid[id1] |= (BIT(gid));
} else {
/* Pair 1 */
gid = (i << 1) + 1;
gid_valid[id0] &= ~(BIT(gid));
gid_valid[id1] &= ~(BIT(gid));
/* Pair 2 */
gid += 1;
gid_valid[id0] &= ~(BIT(gid));
gid_valid[id1] &= ~(BIT(gid));
}
}
for (i = 0; i < MAX_BEAMFORMEE_ENTRY_NUM; i++) {
bfee = &info->bfee_entry[i];
if (_FALSE == bfee->used)
continue;
if (TEST_FLAG(bfee->cap, BEAMFORMEE_CAP_VHT_MU)
&& (bfee->mu_reg_index < 6)) {
val32 = gid_valid[bfee->mu_reg_index];
for (j = 0; j < 4; j++) {
bfee->gid_valid[j] = (u8)(val32 & 0xFF);
val32 >>= 8;
}
}
}
mu_tx_ctl = rtw_read32(adapter, REG_MU_TX_CTL_8822B);
for (i = 0; i < 6; i++) {
mu_tx_ctl = BIT_SET_R_MU_TAB_SEL_8822B(mu_tx_ctl, i);
rtw_write32(adapter, REG_MU_TX_CTL_8822B, mu_tx_ctl);
/* Set MU STA gid valid table */
rtw_write32(adapter, REG_MU_STA_GID_VLD_8822B, gid_valid[i]);
}
/* Enable TxMU PPDU */
mu_tx_ctl |= BIT_R_EN_MU_MIMO_8822B;
rtw_write32(adapter, REG_MU_TX_CTL_8822B, mu_tx_ctl);
break;
default:
break;
}
}
static void _config_sounding(PADAPTER adapter, struct beamformee_entry *bfee, u8 mu_sounding, enum _HW_CFG_SOUNDING_TYPE cfg_type)
{
if (cfg_type == HW_CFG_SOUNDING_TYPE_RESET) {
RTW_INFO("%s: HW_CFG_SOUNDING_TYPE_RESET\n", __FUNCTION__);
_sounding_reset_all(adapter);
return;
}
if (_FALSE == mu_sounding)
_sounding_config_su(adapter, bfee, cfg_type);
else
_sounding_config_mu(adapter, bfee, cfg_type);
}
static void _config_beamformer_su(PADAPTER adapter, struct beamformer_entry *bfer)
{
/* Beamforming */
u8 nc_index = 0, nr_index = 0;
u8 grouping = 0, codebookinfo = 0, coefficientsize = 0;
u32 addr_bfer_info, addr_csi_rpt;
u32 csi_param;
/* Misc */
u8 i;
RTW_INFO("%s: Config SU BFer entry HW setting\n", __FUNCTION__);
if (bfer->su_reg_index == 0) {
addr_bfer_info = REG_ASSOCIATED_BFMER0_INFO_8822B;
addr_csi_rpt = REG_TX_CSI_RPT_PARAM_BW20_8822B;
} else {
addr_bfer_info = REG_ASSOCIATED_BFMER1_INFO_8822B;
addr_csi_rpt = REG_TX_CSI_RPT_PARAM_BW20_8822B + 2;
}
/* Sounding protocol control */
rtw_write8(adapter, REG_SND_PTCL_CTRL_8822B, 0xDB);
/* MAC address/Partial AID of Beamformer */
for (i = 0; i < 6; i++)
rtw_write8(adapter, addr_bfer_info+i, bfer->mac_addr[i]);
/* CSI report parameters of Beamformer */
nc_index = _bf_get_nrx(adapter);
/*
* 0x718[7] = 1 use Nsts
* 0x718[7] = 0 use reg setting
* As Bfee, we use Nsts, so nr_index don't care
*/
nr_index = bfer->NumofSoundingDim;
grouping = 0;
/* for ac = 1, for n = 3 */
if (TEST_FLAG(bfer->cap, BEAMFORMER_CAP_VHT_SU))
codebookinfo = 1;
else if (TEST_FLAG(bfer->cap, BEAMFORMER_CAP_HT_EXPLICIT))
codebookinfo = 3;
coefficientsize = 3;
csi_param = (u16)((coefficientsize<<10)|(codebookinfo<<8)|(grouping<<6)|(nr_index<<3)|(nc_index));
rtw_write16(adapter, addr_csi_rpt, csi_param);
RTW_INFO("%s: nc=%d nr=%d group=%d codebookinfo=%d coefficientsize=%d\n",
__FUNCTION__, nc_index, nr_index, grouping, codebookinfo, coefficientsize);
RTW_INFO("%s: csi=0x%04x\n", __FUNCTION__, csi_param);
/* ndp_rx_standby_timer */
rtw_write8(adapter, REG_SND_PTCL_CTRL_8822B+3, 0x70);
}
static void _config_beamformer_mu(PADAPTER adapter, struct beamformer_entry *bfer)
{
/* General */
PHAL_DATA_TYPE hal;
/* Beamforming */
struct beamforming_info *bf_info;
u8 nc_index = 0, nr_index = 0;
u8 grouping = 0, codebookinfo = 0, coefficientsize = 0;
u32 csi_param;
/* Misc */
u8 i, val8;
u16 val16;
RTW_INFO("%s: Config MU BFer entry HW setting\n", __FUNCTION__);
hal = GET_HAL_DATA(adapter);
bf_info = GET_BEAMFORM_INFO(adapter);
/* Reset GID table */
for (i = 0; i < 8; i++)
bfer->gid_valid[i] = 0;
for (i = 0; i < 16; i++)
bfer->user_position[i] = 0;
/* CSI report parameters of Beamformer */
nc_index = _bf_get_nrx(adapter);
nr_index = 1; /* 0x718[7] = 1 use Nsts, 0x718[7] = 0 use reg setting. as Bfee, we use Nsts, so Nr_index don't care */
grouping = 0; /* no grouping */
codebookinfo = 1; /* 7 bit for psi, 9 bit for phi */
coefficientsize = 0; /* This is nothing really matter */
csi_param = (u16)((coefficientsize<<10)|(codebookinfo<<8)|
(grouping<<6)|(nr_index<<3)|(nc_index));
RTW_INFO("%s: nc=%d nr=%d group=%d codebookinfo=%d coefficientsize=%d\n",
__func__, nc_index, nr_index, grouping, codebookinfo,
coefficientsize);
RTW_INFO("%s: csi=0x%04x\n", __func__, csi_param);
rtw_halmac_bf_add_mu_bfer(adapter_to_dvobj(adapter), bfer->p_aid,
csi_param, bfer->aid & 0xfff, HAL_CSI_SEG_4K,
bfer->mac_addr);
bf_info->cur_csi_rpt_rate = HALMAC_OFDM6;
rtw_halmac_bf_cfg_sounding(adapter_to_dvobj(adapter), HAL_BFEE,
bf_info->cur_csi_rpt_rate);
/* Set 0x6A0[14] = 1 to accept action_no_ack */
val8 = rtw_read8(adapter, REG_RXFLTMAP0_8822B+1);
val8 |= (BIT_MGTFLT14EN_8822B >> 8);
rtw_write8(adapter, REG_RXFLTMAP0_8822B+1, val8);
/* Set 0x6A2[5:4] = 1 to NDPA and BF report poll */
val8 = rtw_read8(adapter, REG_RXFLTMAP1_8822B);
val8 |= BIT_CTRLFLT4EN_8822B | BIT_CTRLFLT5EN_8822B;
rtw_write8(adapter, REG_RXFLTMAP1_8822B, val8);
/* for B-Cut */
if (IS_B_CUT(hal->version_id)) {
phy_set_bb_reg(adapter, REG_RXFLTMAP0_8822B, BIT(20), 0);
phy_set_bb_reg(adapter, REG_RXFLTMAP3_8822B, BIT(20), 0);
}
}
static void _config_beamformee_su(PADAPTER adapter, struct beamformee_entry *bfee)
{
/* General */
struct mlme_priv *mlme;
/* Beamforming */
struct beamforming_info *info;
u8 idx;
u16 p_aid = 0;
/* Misc */
u8 val8;
u16 val16;
u32 val32;
RTW_INFO("%s: Config SU BFee entry HW setting\n", __FUNCTION__);
mlme = &adapter->mlmepriv;
info = GET_BEAMFORM_INFO(adapter);
idx = bfee->su_reg_index;
if ((check_fwstate(mlme, WIFI_ADHOC_STATE) == _TRUE)
|| (check_fwstate(mlme, WIFI_ADHOC_MASTER_STATE) == _TRUE))
p_aid = bfee->mac_id;
else
p_aid = bfee->p_aid;
phydm_8822btxbf_rfmode(GET_PDM_ODM(adapter), info->beamformee_su_cnt, info->beamformee_mu_cnt);
/* P_AID of Beamformee & enable NDPA transmission & enable NDPA interrupt */
val32 = rtw_read32(adapter, REG_TXBF_CTRL_8822B);
if (idx == 0) {
val32 = BIT_SET_R_TXBF0_AID_8822B(val32, p_aid);
val32 &= ~(BIT_R_TXBF0_20M_8822B | BIT_R_TXBF0_40M_8822B | BIT_R_TXBF0_80M_8822B);
} else {
val32 = BIT_SET_R_TXBF1_AID_8822B(val32, p_aid);
val32 &= ~(BIT_R_TXBF1_20M_8822B | BIT_R_TXBF1_40M_8822B | BIT_R_TXBF1_80M_8822B);
}
val32 |= BIT_R_EN_NDPA_INT_8822B | BIT_USE_NDPA_PARAMETER_8822B | BIT_R_ENABLE_NDPA_8822B;
rtw_write32(adapter, REG_TXBF_CTRL_8822B, val32);
/* CSI report parameters of Beamformee */
val32 = rtw_read32(adapter, REG_ASSOCIATED_BFMEE_SEL_8822B);
if (idx == 0) {
val32 = BIT_SET_AID0_8822B(val32, p_aid);
val32 |= BIT_TXUSER_ID0_8822B;
/* unknown? */
val32 &= 0x03FFFFFF;
val32 |= 0x60000000;
} else {
val32 = BIT_SET_AID1_8822B(val32, p_aid);
val32 |= BIT_TXUSER_ID1_8822B;
/* unknown? */
val32 &= 0x03FFFFFF;
val32 |= 0xE0000000;
}
rtw_write32(adapter, REG_ASSOCIATED_BFMEE_SEL_8822B, val32);
}
static void _config_beamformee_mu(PADAPTER adapter, struct beamformee_entry *bfee)
{
/* General */
PHAL_DATA_TYPE hal;
/* Beamforming */
struct beamforming_info *info;
u8 idx;
u32 gid_valid = 0, user_position_l = 0, user_position_h = 0;
u32 mu_reg[6] = {REG_WMAC_ASSOCIATED_MU_BFMEE2_8822B,
REG_WMAC_ASSOCIATED_MU_BFMEE3_8822B,
REG_WMAC_ASSOCIATED_MU_BFMEE4_8822B,
REG_WMAC_ASSOCIATED_MU_BFMEE5_8822B,
REG_WMAC_ASSOCIATED_MU_BFMEE6_8822B,
REG_WMAC_ASSOCIATED_MU_BFMEE7_8822B};
/* Misc */
u8 i, val8;
u16 val16;
u32 val32;
RTW_INFO("%s: Config MU BFee entry HW setting\n", __FUNCTION__);
hal = GET_HAL_DATA(adapter);
info = GET_BEAMFORM_INFO(adapter);
idx = bfee->mu_reg_index;
/* User position table */
switch (idx) {
case 0:
gid_valid = 0x7fe;
user_position_l = 0x111110;
user_position_h = 0x0;
break;
case 1:
gid_valid = 0x7f806;
user_position_l = 0x11000004;
user_position_h = 0x11;
break;
case 2:
gid_valid = 0x1f81818;
user_position_l = 0x400040;
user_position_h = 0x11100;
break;
case 3:
gid_valid = 0x1e186060;
user_position_l = 0x4000400;
user_position_h = 0x1100040;
break;
case 4:
gid_valid = 0x66618180;
user_position_l = 0x40004000;
user_position_h = 0x10040400;
break;
case 5:
gid_valid = 0x79860600;
user_position_l = 0x40000;
user_position_h = 0x4404004;
break;
}
for (i = 0; i < 8; i++) {
if (i < 4) {
bfee->gid_valid[i] = (u8)(gid_valid & 0xFF);
gid_valid >>= 8;
} else {
bfee->gid_valid[i] = 0;
}
}
for (i = 0; i < 16; i++) {
if (i < 4)
bfee->user_position[i] = (u8)((user_position_l >> (i*8)) & 0xFF);
else if (i < 8)
bfee->user_position[i] = (u8)((user_position_h >> ((i-4)*8)) & 0xFF);
else
bfee->user_position[i] = 0;
}
/* Sounding protocol control */
rtw_write8(adapter, REG_SND_PTCL_CTRL_8822B, 0xDB);
/* select MU STA table */
val32 = rtw_read32(adapter, REG_MU_TX_CTL_8822B);
val32 = BIT_SET_R_MU_TAB_SEL_8822B(val32, idx);
rtw_write32(adapter, REG_MU_TX_CTL_8822B, val32);
/* Reset gid_valid table */
rtw_write32(adapter, REG_MU_STA_GID_VLD_8822B, 0);
rtw_write32(adapter, REG_MU_STA_USER_POS_INFO_8822B , user_position_l);
rtw_write32(adapter, REG_MU_STA_USER_POS_INFO_8822B+4 , user_position_h);
/* set validity of MU STAs */
val32 = BIT_SET_R_MU_TABLE_VALID_8822B(val32, info->beamformee_mu_reg_maping);
rtw_write32(adapter, REG_MU_TX_CTL_8822B, val32);
RTW_INFO("%s: RegMUTxCtrl=0x%x, user_position_l=0x%x, user_position_h=0x%x\n",
__FUNCTION__, val32, user_position_l, user_position_h);
val16 = rtw_read16(adapter, mu_reg[idx]);
val16 &= 0xFE00; /* Clear PAID */
val16 |= BIT(9); /* Enable MU BFee */
val16 |= bfee->p_aid;
rtw_write16(adapter, mu_reg[idx], val16);
RTW_INFO("%s: Write mu_reg 0x%x = 0x%x\n",
__FUNCTION__, mu_reg[idx], val16);
/* 0x42C[30] = 1 (0: from Tx desc, 1: from 0x45F) */
val8 = rtw_read8(adapter, REG_TXBF_CTRL_8822B+3);
val8 |= 0xD0; /* Set bit 28, 30, 31 to 3b'111 */
rtw_write8(adapter, REG_TXBF_CTRL_8822B+3, val8);
/* Set NDPA rate*/
val8 = phydm_get_ndpa_rate(GET_PDM_ODM(adapter));
rtw_write8(adapter, REG_NDPA_RATE_8822B, val8);
val8 = rtw_read8(adapter, REG_NDPA_OPT_CTRL_8822B);
val8 = BIT_SET_R_NDPA_BW_8822B(val8, 0); /* Clear bit 0, 1 */
rtw_write8(adapter, REG_NDPA_OPT_CTRL_8822B, val8);
val32 = rtw_read32(adapter, REG_SND_PTCL_CTRL_8822B);
val32 = (val32 & 0xFF0000FF) | 0x020200; /* Set [23:8] to 0x0202 */
rtw_write32(adapter, REG_SND_PTCL_CTRL_8822B, val32);
/* Set 0x6A0[14] = 1 to accept action_no_ack */
val8 = rtw_read8(adapter, REG_RXFLTMAP0_8822B+1);
val8 |= (BIT_MGTFLT14EN_8822B >> 8);
rtw_write8(adapter, REG_RXFLTMAP0_8822B+1, val8);
/* 0x718[15] = 1. Patch for STA2 CSI report start offset error issue for C-cut and later version */
if (!IS_A_CUT(hal->version_id) || !IS_B_CUT(hal->version_id)) {
val8 = rtw_read8(adapter, REG_SND_PTCL_CTRL_8822B+1);
val8 |= (BIT_VHTNDP_RPTPOLL_CSI_STR_OFFSET_SEL_8822B >> 8);
rtw_write8(adapter, REG_SND_PTCL_CTRL_8822B+1, val8);
}
/* End of MAC registers setting */
phydm_8822btxbf_rfmode(GET_PDM_ODM(adapter), info->beamformee_su_cnt, info->beamformee_mu_cnt);
/* <tynli_mark> <TODO> Need to set timer 2015.12.23 */
/* Special for plugfest */
rtw_mdelay_os(50); /* wait for 4-way handshake ending */
rtw_bf_send_vht_gid_mgnt_packet(adapter, bfee->mac_addr, bfee->gid_valid, bfee->user_position);
}
static void _reset_beamformer_su(PADAPTER adapter, struct beamformer_entry *bfer)
{
/* Beamforming */
struct beamforming_info *info;
u8 idx;
info = GET_BEAMFORM_INFO(adapter);
/* SU BFer */
idx = bfer->su_reg_index;
if (idx == 0) {
rtw_write32(adapter, REG_ASSOCIATED_BFMER0_INFO_8822B, 0);
rtw_write16(adapter, REG_ASSOCIATED_BFMER0_INFO_8822B+4, 0);
rtw_write16(adapter, REG_TX_CSI_RPT_PARAM_BW20_8822B, 0);
} else {
rtw_write32(adapter, REG_ASSOCIATED_BFMER1_INFO_8822B, 0);
rtw_write16(adapter, REG_ASSOCIATED_BFMER1_INFO_8822B+4, 0);
rtw_write16(adapter, REG_TX_CSI_RPT_PARAM_BW20_8822B+2, 0);
}
info->beamformer_su_reg_maping &= ~BIT(idx);
bfer->su_reg_index = 0xFF;
RTW_INFO("%s: Clear SU BFer entry(%d) HW setting\n", __FUNCTION__, idx);
}
static void _reset_beamformer_mu(PADAPTER adapter, struct beamformer_entry *bfer)
{
struct beamforming_info *bf_info;
bf_info = GET_BEAMFORM_INFO(adapter);
rtw_halmac_bf_del_mu_bfer(adapter_to_dvobj(adapter));
if (bf_info->beamformer_su_cnt == 0 &&
bf_info->beamformer_mu_cnt == 0)
rtw_halmac_bf_del_sounding(adapter_to_dvobj(adapter), HAL_BFEE);
RTW_INFO("%s: Clear MU BFer entry HW setting\n", __FUNCTION__);
}
static void _reset_beamformee_su(PADAPTER adapter, struct beamformee_entry *bfee)
{
/* Beamforming */
struct beamforming_info *info;
u8 idx;
/* Misc */
u32 txbf_ctrl, bfmee_sel;
info = GET_BEAMFORM_INFO(adapter);
/* SU BFee */
idx = bfee->su_reg_index;
/* Force disable sounding config */
_config_sounding(adapter, bfee, _FALSE, HW_CFG_SOUNDING_TYPE_LEAVE);
/* clear P_AID */
txbf_ctrl = rtw_read32(adapter, REG_TXBF_CTRL_8822B);
bfmee_sel = rtw_read32(adapter, REG_ASSOCIATED_BFMEE_SEL_8822B);
if (idx == 0) {
txbf_ctrl = BIT_SET_R_TXBF0_AID_8822B(txbf_ctrl, 0);
txbf_ctrl &= ~(BIT_R_TXBF0_20M_8822B | BIT_R_TXBF0_40M_8822B | BIT_R_TXBF0_80M_8822B);
bfmee_sel = BIT_SET_AID0_8822B(bfmee_sel, 0);
bfmee_sel &= ~BIT_TXUSER_ID0_8822B;
} else {
txbf_ctrl = BIT_SET_R_TXBF1_AID_8822B(txbf_ctrl, 0);
txbf_ctrl &= ~(BIT_R_TXBF1_20M_8822B | BIT_R_TXBF1_40M_8822B | BIT_R_TXBF1_80M_8822B);
bfmee_sel = BIT_SET_AID1_8822B(bfmee_sel, 0);
bfmee_sel &= ~BIT_TXUSER_ID1_8822B;
}
txbf_ctrl |= BIT_R_EN_NDPA_INT_8822B | BIT_USE_NDPA_PARAMETER_8822B | BIT_R_ENABLE_NDPA_8822B;
rtw_write32(adapter, REG_TXBF_CTRL_8822B, txbf_ctrl);
rtw_write32(adapter, REG_ASSOCIATED_BFMEE_SEL_8822B, bfmee_sel);
info->beamformee_su_reg_maping &= ~BIT(idx);
bfee->su_reg_index = 0xFF;
RTW_INFO("%s: Clear SU BFee entry(%d) HW setting\n", __FUNCTION__, idx);
}
static void _reset_beamformee_mu(PADAPTER adapter, struct beamformee_entry *bfee)
{
/* Beamforming */
struct beamforming_info *info;
u8 idx;
u32 mu_reg[6] = {REG_WMAC_ASSOCIATED_MU_BFMEE2_8822B,
REG_WMAC_ASSOCIATED_MU_BFMEE3_8822B,
REG_WMAC_ASSOCIATED_MU_BFMEE4_8822B,
REG_WMAC_ASSOCIATED_MU_BFMEE5_8822B,
REG_WMAC_ASSOCIATED_MU_BFMEE6_8822B,
REG_WMAC_ASSOCIATED_MU_BFMEE7_8822B};
/* Misc */
u32 val32;
info = GET_BEAMFORM_INFO(adapter);
/* MU BFee */
idx = bfee->mu_reg_index;
/* Disable sending NDPA & BF-rpt-poll to this BFee */
rtw_write16(adapter, mu_reg[idx] , 0);
/* Set validity of MU STA */
val32 = rtw_read32(adapter, REG_MU_TX_CTL_8822B);
val32 &= ~BIT(idx);
rtw_write32(adapter, REG_MU_TX_CTL_8822B, val32);
/* Force disable sounding config */
_config_sounding(adapter, bfee, _TRUE, HW_CFG_SOUNDING_TYPE_LEAVE);
info->beamformee_mu_reg_maping &= ~BIT(idx);
bfee->mu_reg_index = 0xFF;
RTW_INFO("%s: Clear MU BFee entry(%d) HW setting\n", __FUNCTION__, idx);
}
void rtl8822b_phy_bf_reset_all(PADAPTER adapter)
{
struct beamforming_info *info;
u8 i, val8;
u32 val32;
RTW_INFO("+%s\n", __FUNCTION__);
info = GET_BEAMFORM_INFO(adapter);
info->bSetBFHwConfigInProgess = _TRUE;
/* Reset MU BFer entry setting */
/* Clear validity of MU STA0 and MU STA1 */
val32 = rtw_read32(adapter, REG_MU_TX_CTL_8822B);
val32 = BIT_SET_R_MU_TABLE_VALID_8822B(val32, 0);
rtw_write32(adapter, REG_MU_TX_CTL_8822B, val32);
/* Reset SU BFer entry setting */
rtw_write32(adapter, REG_ASSOCIATED_BFMER0_INFO_8822B, 0);
rtw_write16(adapter, REG_ASSOCIATED_BFMER0_INFO_8822B+4, 0);
rtw_write16(adapter, REG_TX_CSI_RPT_PARAM_BW20_8822B, 0);
rtw_write32(adapter, REG_ASSOCIATED_BFMER1_INFO_8822B, 0);
rtw_write16(adapter, REG_ASSOCIATED_BFMER1_INFO_8822B+4, 0);
rtw_write16(adapter, REG_TX_CSI_RPT_PARAM_BW20_8822B+2, 0);
/* Force disable sounding */
_config_sounding(adapter, NULL, _FALSE, HW_CFG_SOUNDING_TYPE_RESET);
/* Config RF mode */
phydm_8822btxbf_rfmode(GET_PDM_ODM(adapter), info->beamformee_su_cnt, info->beamformee_mu_cnt);
/* Reset MU BFee entry setting */
/* Disable sending NDPA & BF-rpt-poll to all BFee */
for (i=0; i < MAX_NUM_BEAMFORMEE_MU; i++)
rtw_write16(adapter, REG_WMAC_ASSOCIATED_MU_BFMEE2_8822B+(i*2), 0);
/* set validity of MU STA */
rtw_write32(adapter, REG_MU_TX_CTL_8822B, 0);
/* Reset SU BFee entry setting */
/* SU BF0 and BF1 */
val32 = BIT_R_EN_NDPA_INT_8822B | BIT_USE_NDPA_PARAMETER_8822B | BIT_R_ENABLE_NDPA_8822B;
rtw_write32(adapter, REG_TXBF_CTRL_8822B, val32);
rtw_write32(adapter, REG_ASSOCIATED_BFMEE_SEL_8822B, 0);
info->bSetBFHwConfigInProgess = _FALSE;
/* Clear SU TxBF workaround BB registers */
if (_TRUE == info->bEnableSUTxBFWorkAround)
rtl8822b_phy_bf_set_csi_report(adapter, &info->TargetCSIInfo);
RTW_INFO("-%s\n", __FUNCTION__);
}
void rtl8822b_phy_bf_init(PADAPTER adapter)
{
u8 v8;
u32 v32;
v32 = rtw_read32(adapter, REG_MU_TX_CTL_8822B);
/* Enable P1 aggr new packet according to P0 transfer time */
v32 |= BIT_R_MU_P1_WAIT_STATE_EN_8822B;
/* MU Retry Limit */
v32 = BIT_SET_R_MU_RL_8822B(v32, 0xA);
/* Disable Tx MU-MIMO until sounding done */
v32 &= ~BIT_R_EN_MU_MIMO_8822B;
/* Clear validity of MU STAs */
v32 = BIT_SET_R_MU_TABLE_VALID_8822B(v32, 0);
rtw_write32(adapter, REG_MU_TX_CTL_8822B, v32);
/* MU-MIMO Option as default value */
v8 = BIT_WMAC_TXMU_ACKPOLICY_8822B(3);
v8 |= BIT_BIT_WMAC_TXMU_ACKPOLICY_EN_8822B;
rtw_write8(adapter, REG_WMAC_MU_BF_OPTION_8822B, v8);
/* MU-MIMO Control as default value */
rtw_write16(adapter, REG_WMAC_MU_BF_CTL_8822B, 0);
/* Set MU NDPA rate & BW source */
/* 0x42C[30] = 1 (0: from Tx desc, 1: from 0x45F) */
v8 = rtw_read8(adapter, REG_TXBF_CTRL_8822B+3);
v8 |= (BIT_USE_NDPA_PARAMETER_8822B >> 24);
rtw_write8(adapter, REG_TXBF_CTRL_8822B+3, v8);
/* 0x45F[7:0] = 0x10 (Rate=OFDM_6M, BW20) */
rtw_write8(adapter, REG_NDPA_OPT_CTRL_8822B, 0x10);
/* Temp Settings */
/* STA2's CSI rate is fixed at 6M */
v8 = rtw_read8(adapter, 0x6DF);
v8 = (v8 & 0xC0) | 0x4;
rtw_write8(adapter, 0x6DF, v8);
/* Grouping bitmap parameters */
rtw_write32(adapter, 0x1C94, 0xAFFFAFFF);
}
void rtl8822b_phy_bf_enter(PADAPTER adapter, struct sta_info *sta)
{
struct beamforming_info *info;
struct beamformer_entry *bfer;
struct beamformee_entry *bfee;
RTW_INFO("+%s: " MAC_FMT "\n", __FUNCTION__, MAC_ARG(sta->cmn.mac_addr));
info = GET_BEAMFORM_INFO(adapter);
bfer = rtw_bf_bfer_get_entry_by_addr(adapter, sta->cmn.mac_addr);
bfee = rtw_bf_bfee_get_entry_by_addr(adapter, sta->cmn.mac_addr);
info->bSetBFHwConfigInProgess = _TRUE;
if (bfer) {
bfer->state = BEAMFORM_ENTRY_HW_STATE_ADDING;
if (TEST_FLAG(bfer->cap, BEAMFORMER_CAP_VHT_MU))
_config_beamformer_mu(adapter, bfer);
else if (TEST_FLAG(bfer->cap, BEAMFORMER_CAP_VHT_SU|BEAMFORMER_CAP_HT_EXPLICIT))
_config_beamformer_su(adapter, bfer);
bfer->state = BEAMFORM_ENTRY_HW_STATE_ADDED;
}
if (bfee) {
bfee->state = BEAMFORM_ENTRY_HW_STATE_ADDING;
if (TEST_FLAG(bfee->cap, BEAMFORMEE_CAP_VHT_MU))
_config_beamformee_mu(adapter, bfee);
else if (TEST_FLAG(bfee->cap, BEAMFORMEE_CAP_VHT_SU|BEAMFORMEE_CAP_HT_EXPLICIT))
_config_beamformee_su(adapter, bfee);
bfee->state = BEAMFORM_ENTRY_HW_STATE_ADDED;
}
info->bSetBFHwConfigInProgess = _FALSE;
RTW_INFO("-%s\n", __FUNCTION__);
}
void rtl8822b_phy_bf_leave(PADAPTER adapter, u8 *addr)
{
struct beamforming_info *info;
struct beamformer_entry *bfer;
struct beamformee_entry *bfee;
RTW_INFO("+%s: " MAC_FMT "\n", __FUNCTION__, MAC_ARG(addr));
info = GET_BEAMFORM_INFO(adapter);
bfer = rtw_bf_bfer_get_entry_by_addr(adapter, addr);
bfee = rtw_bf_bfee_get_entry_by_addr(adapter, addr);
/* Clear P_AID of Beamformee */
/* Clear MAC address of Beamformer */
/* Clear Associated Bfmee Sel */
if (bfer) {
bfer->state = BEAMFORM_ENTRY_HW_STATE_DELETING;
rtw_write8(adapter, REG_SND_PTCL_CTRL_8822B, 0xD8);
if (TEST_FLAG(bfer->cap, BEAMFORMER_CAP_VHT_MU))
_reset_beamformer_mu(adapter, bfer);
else if (TEST_FLAG(bfer->cap, BEAMFORMER_CAP_VHT_SU|BEAMFORMER_CAP_HT_EXPLICIT))
_reset_beamformer_su(adapter, bfer);
bfer->state = BEAMFORM_ENTRY_HW_STATE_NONE;
bfer->cap = BEAMFORMING_CAP_NONE;
bfer->used = _FALSE;
}
if (bfee) {
bfee->state = BEAMFORM_ENTRY_HW_STATE_DELETING;
phydm_8822btxbf_rfmode(GET_PDM_ODM(adapter), info->beamformee_su_cnt, info->beamformee_mu_cnt);
if (TEST_FLAG(bfee->cap, BEAMFORMEE_CAP_VHT_MU))
_reset_beamformee_mu(adapter, bfee);
else if (TEST_FLAG(bfee->cap, BEAMFORMEE_CAP_VHT_SU|BEAMFORMEE_CAP_HT_EXPLICIT))
_reset_beamformee_su(adapter, bfee);
bfee->state = BEAMFORM_ENTRY_HW_STATE_NONE;
bfee->cap = BEAMFORMING_CAP_NONE;
bfee->used = _FALSE;
}
RTW_INFO("-%s\n", __FUNCTION__);
}
void rtl8822b_phy_bf_set_gid_table(PADAPTER adapter,
struct beamformer_entry *bfer_info)
{
struct beamformer_entry *bfer;
struct beamforming_info *info;
u32 gid_valid[2] = {0};
u32 user_position[4] = {0};
int i;
/* update bfer info */
bfer = rtw_bf_bfer_get_entry_by_addr(adapter, bfer_info->mac_addr);
if (!bfer) {
RTW_INFO("%s: Cannot find BFer entry!!\n", __func__);
return;
}
_rtw_memcpy(bfer->gid_valid, bfer_info->gid_valid, 8);
_rtw_memcpy(bfer->user_position, bfer_info->user_position, 16);
info = GET_BEAMFORM_INFO(adapter);
info->bSetBFHwConfigInProgess = _TRUE;
/* For GID 0~31 */
for (i = 0; i < 4; i++)
gid_valid[0] |= (bfer->gid_valid[i] << (i << 3));
for (i = 0; i < 8; i++) {
if (i < 4)
user_position[0] |= (bfer->user_position[i] << (i << 3));
else
user_position[1] |= (bfer->user_position[i] << ((i - 4) << 3));
}
RTW_INFO("%s: STA0: gid_valid=0x%x, user_position_l=0x%x, user_position_h=0x%x\n",
__func__, gid_valid[0], user_position[0], user_position[1]);
/* For GID 32~64 */
for (i = 4; i < 8; i++)
gid_valid[1] |= (bfer->gid_valid[i] << ((i - 4) << 3));
for (i = 8; i < 16; i++) {
if (i < 12)
user_position[2] |= (bfer->user_position[i] << ((i - 8) << 3));
else
user_position[3] |= (bfer->user_position[i] << ((i - 12) << 3));
}
RTW_INFO("%s: STA1: gid_valid=0x%x, user_position_l=0x%x, user_position_h=0x%x\n",
__func__, gid_valid[1], user_position[2], user_position[3]);
rtw_halmac_bf_cfg_mu_bfee(adapter_to_dvobj(adapter), gid_valid, user_position);
info->bSetBFHwConfigInProgess = _FALSE;
}
void rtl8822b_phy_bf_set_csi_report(PADAPTER adapter, struct _RT_CSI_INFO *csi)
{
PHAL_DATA_TYPE hal;
struct beamforming_info *info;
BOOLEAN enable_su = FALSE;
hal = GET_HAL_DATA(adapter);
info = GET_BEAMFORM_INFO(adapter);
info->bSetBFHwConfigInProgess = _TRUE;
if (IS_A_CUT(hal->version_id) || IS_B_CUT(hal->version_id) || IS_C_CUT(hal->version_id)) {
/* If there is an MU BFee added then discard the SU BFee supported capability */
if ((info->beamformee_su_cnt > 0) && (info->beamformee_mu_cnt == 0))
enable_su = TRUE;
phydm_8822b_sutxbfer_workaroud(
GET_PDM_ODM(adapter),
enable_su,
csi->Nc,
csi->Nr,
csi->Ng,
csi->CodeBook,
csi->ChnlWidth,
csi->bVHT);
RTW_INFO("%s: bEnable=%d, Nc=%d, Nr=%d, CH_W=%d, Ng=%d, CodeBook=%d\n",
__FUNCTION__, bEnable,
csi->Nc, csi->Nr, csi->ChnlWidth, csi->Ng, csi->CodeBook);
}
info->bSetBFHwConfigInProgess = _FALSE;
}
void rtl8822b_phy_bf_sounding_status(PADAPTER adapter, u8 status)
{
struct beamforming_info *info;
struct sounding_info *sounding;
struct beamformee_entry *bfee;
enum _HW_CFG_SOUNDING_TYPE sounding_type;
u16 val16;
u32 val32;
u8 is_sounding_success[6] = {0};
RTW_INFO("+%s\n", __FUNCTION__);
info = GET_BEAMFORM_INFO(adapter);
sounding = &info->sounding_info;
info->bSetBFHwConfigInProgess = _TRUE;
if (sounding->state == SOUNDING_STATE_SU_SOUNDDOWN) {
/* SU sounding done */
RTW_INFO("%s: SUBFeeCurIdx=%d\n", __FUNCTION__, sounding->su_bfee_curidx);
bfee = &info->bfee_entry[sounding->su_bfee_curidx];
if (bfee->bSoundingTimeout) {
RTW_INFO("%s: Return because SUBFeeCurIdx(%d) is sounding timeout!!!\n", __FUNCTION__, sounding->su_bfee_curidx);
info->bSetBFHwConfigInProgess = _FALSE;
return;
}
RTW_INFO("%s: Config SU sound down HW settings\n", __FUNCTION__);
/* Config SU sounding */
if (_TRUE == status)
sounding_type = HW_CFG_SOUNDING_TYPE_SOUNDDOWN;
else
sounding_type = HW_CFG_SOUNDING_TYPE_LEAVE;
_config_sounding(adapter, bfee, _FALSE, sounding_type);
/* <tynli_note> Why set here? */
/* disable NDP packet use beamforming */
val16 = rtw_read16(adapter, REG_TXBF_CTRL_8822B);
val16 |= BIT_DIS_NDP_BFEN_8822B;
rtw_write16(adapter, REG_TXBF_CTRL_8822B, val16);
} else if (sounding->state == SOUNDING_STATE_MU_SOUNDDOWN) {
/* MU sounding done */
RTW_INFO("%s: Config MU sound down HW settings\n", __FUNCTION__);
val32 = rtw_read32(adapter, REG_WMAC_ASSOCIATED_MU_BFMEE2_8822B);
is_sounding_success[0] = (val32 & BIT_STATUS_BFEE2_8822B) ? 1:0;
is_sounding_success[1] = ((val32 >> 16) & BIT_STATUS_BFEE3_8822B) ? 1:0;
val32 = rtw_read32(adapter, REG_WMAC_ASSOCIATED_MU_BFMEE4_8822B);
is_sounding_success[2] = (val32 & BIT_STATUS_BFEE4_8822B) ? 1:0;
is_sounding_success[3] = ((val32 >> 16) & BIT_STATUS_BFEE5_8822B) ? 1:0;
val32 = rtw_read32(adapter, REG_WMAC_ASSOCIATED_MU_BFMEE6_8822B);
is_sounding_success[4] = (val32 & BIT_STATUS_BFEE6_8822B) ? 1:0;
is_sounding_success[5] = ((val32 >> 16) & BIT_STATUS_BFEE7_8822B) ? 1:0;
RTW_INFO("%s: is_sounding_success STA1:%d, STA2:%d, STA3:%d, STA4:%d, STA5:%d, STA6:%d\n",
__FUNCTION__, is_sounding_success[0], is_sounding_success[1] , is_sounding_success[2],
is_sounding_success[3], is_sounding_success[4], is_sounding_success[5]);
/* Config MU sounding */
_config_sounding(adapter, NULL, _TRUE, HW_CFG_SOUNDING_TYPE_SOUNDDOWN);
} else {
RTW_INFO("%s: Invalid sounding state(%d). Do nothing!\n", __FUNCTION__, sounding->state);
}
info->bSetBFHwConfigInProgess = _FALSE;
RTW_INFO("-%s\n", __FUNCTION__);
}
#endif /* CONFIG_BEAMFORMING */