mirror of
https://github.com/RinCat/RTL88x2BU-Linux-Driver.git
synced 2024-11-10 01:02:50 +00:00
278 lines
8.9 KiB
C
278 lines
8.9 KiB
C
|
/******************************************************************************
|
||
|
|
*
|
||
|
|
* Copyright(c) 2007 - 2017 Realtek Corporation.
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or modify it
|
||
|
|
* under the terms of version 2 of the GNU General Public License as
|
||
|
|
* published by the Free Software Foundation.
|
||
|
|
*
|
||
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
||
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||
|
|
* more details.
|
||
|
|
*
|
||
|
|
*****************************************************************************/
|
||
|
|
#ifndef __RTL8710B_HAL_H__
|
||
|
|
#define __RTL8710B_HAL_H__
|
||
|
|
|
||
|
|
#include "hal_data.h"
|
||
|
|
|
||
|
|
#include "rtl8710b_spec.h"
|
||
|
|
#include "rtl8710b_rf.h"
|
||
|
|
#include "rtl8710b_dm.h"
|
||
|
|
#include "rtl8710b_recv.h"
|
||
|
|
#include "rtl8710b_xmit.h"
|
||
|
|
#include "rtl8710b_cmd.h"
|
||
|
|
#include "rtl8710b_led.h"
|
||
|
|
#include "Hal8710BPwrSeq.h"
|
||
|
|
#include "Hal8710BPhyReg.h"
|
||
|
|
#include "Hal8710BPhyCfg.h"
|
||
|
|
#ifdef DBG_CONFIG_ERROR_DETECT
|
||
|
|
#include "rtl8710b_sreset.h"
|
||
|
|
#endif
|
||
|
|
#ifdef CONFIG_LPS_POFF
|
||
|
|
#include "rtl8710b_lps_poff.h"
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#define FW_8710B_SIZE 0x8000
|
||
|
|
#define FW_8710B_START_ADDRESS 0x1000
|
||
|
|
#define FW_8710B_END_ADDRESS 0x1FFF /* 0x5FFF */
|
||
|
|
|
||
|
|
typedef struct _RT_FIRMWARE {
|
||
|
|
FIRMWARE_SOURCE eFWSource;
|
||
|
|
#ifdef CONFIG_EMBEDDED_FWIMG
|
||
|
|
u8 *szFwBuffer;
|
||
|
|
#else
|
||
|
|
u8 szFwBuffer[FW_8710B_SIZE];
|
||
|
|
#endif
|
||
|
|
u32 ulFwLength;
|
||
|
|
} RT_FIRMWARE_8710B, *PRT_FIRMWARE_8710B;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* This structure must be cared byte-ordering
|
||
|
|
*
|
||
|
|
* Added by tynli. 2009.12.04. */
|
||
|
|
typedef struct _RT_8710B_FIRMWARE_HDR {
|
||
|
|
/* 8-byte alinment required */
|
||
|
|
|
||
|
|
/* --- LONG WORD 0 ---- */
|
||
|
|
u16 Signature; /* 92C0: test chip; 92C, 88C0: test chip; 88C1: MP A-cut; 92C1: MP A-cut */
|
||
|
|
u8 Category; /* AP/NIC and USB/PCI */
|
||
|
|
u8 Function; /* Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions */
|
||
|
|
u16 Version; /* FW Version */
|
||
|
|
u16 Subversion; /* FW Subversion, default 0x00 */
|
||
|
|
|
||
|
|
/* --- LONG WORD 1 ---- */
|
||
|
|
u8 Month; /* Release time Month field */
|
||
|
|
u8 Date; /* Release time Date field */
|
||
|
|
u8 Hour; /* Release time Hour field */
|
||
|
|
u8 Minute; /* Release time Minute field */
|
||
|
|
u16 RamCodeSize; /* The size of RAM code */
|
||
|
|
u16 Rsvd2;
|
||
|
|
|
||
|
|
/* --- LONG WORD 2 ---- */
|
||
|
|
u32 SvnIdx; /* The SVN entry index */
|
||
|
|
u32 Rsvd3;
|
||
|
|
|
||
|
|
/* --- LONG WORD 3 ---- */
|
||
|
|
u32 Rsvd4;
|
||
|
|
u32 Rsvd5;
|
||
|
|
} RT_8710B_FIRMWARE_HDR, *PRT_8710B_FIRMWARE_HDR;
|
||
|
|
|
||
|
|
#define DRIVER_EARLY_INT_TIME_8710B 0x05
|
||
|
|
#define BCN_DMA_ATIME_INT_TIME_8710B 0x02
|
||
|
|
|
||
|
|
/* for 8710B
|
||
|
|
* TX 32K, RX 16K, Page size 128B for TX, 8B for RX */
|
||
|
|
#define PAGE_SIZE_TX_8710B 128
|
||
|
|
#define PAGE_SIZE_RX_8710B 8
|
||
|
|
|
||
|
|
#define TX_DMA_SIZE_8710B 0x8000 /* 32K(TX) */
|
||
|
|
#define RX_DMA_SIZE_8710B 0x4000 /* 16K(RX) */
|
||
|
|
|
||
|
|
#ifdef CONFIG_WOWLAN
|
||
|
|
#define RESV_FMWF (WKFMCAM_SIZE * MAX_WKFM_CAM_NUM) /* 16 entries, for each is 24 bytes*/
|
||
|
|
#else
|
||
|
|
#define RESV_FMWF 0
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef CONFIG_FW_C2H_DEBUG
|
||
|
|
#define RX_DMA_RESERVED_SIZE_8710B 0x100 /* 256B, reserved for c2h debug message */
|
||
|
|
#else
|
||
|
|
#define RX_DMA_RESERVED_SIZE_8710B 0x80 /* 128B, reserved for tx report */
|
||
|
|
#endif
|
||
|
|
#define RX_DMA_BOUNDARY_8710B\
|
||
|
|
(RX_DMA_SIZE_8710B - RX_DMA_RESERVED_SIZE_8710B - 1)
|
||
|
|
|
||
|
|
|
||
|
|
/* Note: We will divide number of page equally for each queue other than public queue! */
|
||
|
|
|
||
|
|
/* For General Reserved Page Number(Beacon Queue is reserved page)
|
||
|
|
* Beacon:MAX_BEACON_LEN/PAGE_SIZE_TX_8710B
|
||
|
|
* PS-Poll:1, Null Data:1,Qos Null Data:1,BT Qos Null Data:1,CTS-2-SELF,LTE QoS Null*/
|
||
|
|
#define BCNQ_PAGE_NUM_8710B (MAX_BEACON_LEN/PAGE_SIZE_TX_8710B + 6) /*0x08*/
|
||
|
|
|
||
|
|
|
||
|
|
/* For WoWLan , more reserved page
|
||
|
|
* ARP Rsp:1, RWC:1, GTK Info:1,GTK RSP:2,GTK EXT MEM:2, AOAC rpt 1, PNO: 6
|
||
|
|
* NS offload: 2 NDP info: 1
|
||
|
|
*/
|
||
|
|
#ifdef CONFIG_WOWLAN
|
||
|
|
#define WOWLAN_PAGE_NUM_8710B 0x0b
|
||
|
|
#else
|
||
|
|
#define WOWLAN_PAGE_NUM_8710B 0x00
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef CONFIG_PNO_SUPPORT
|
||
|
|
#undef WOWLAN_PAGE_NUM_8710B
|
||
|
|
#define WOWLAN_PAGE_NUM_8710B 0x15
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef CONFIG_AP_WOWLAN
|
||
|
|
#define AP_WOWLAN_PAGE_NUM_8710B 0x02
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#define TX_TOTAL_PAGE_NUMBER_8710B\
|
||
|
|
(0xFF - BCNQ_PAGE_NUM_8710B -WOWLAN_PAGE_NUM_8710B)
|
||
|
|
#define TX_PAGE_BOUNDARY_8710B (TX_TOTAL_PAGE_NUMBER_8710B + 1)
|
||
|
|
|
||
|
|
#define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER_8710B TX_TOTAL_PAGE_NUMBER_8710B
|
||
|
|
#define WMM_NORMAL_TX_PAGE_BOUNDARY_8710B\
|
||
|
|
(WMM_NORMAL_TX_TOTAL_PAGE_NUMBER_8710B + 1)
|
||
|
|
|
||
|
|
/* For Normal Chip Setting
|
||
|
|
* (HPQ + LPQ + NPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER_8710B */
|
||
|
|
#define NORMAL_PAGE_NUM_HPQ_8710B 0x0C
|
||
|
|
#define NORMAL_PAGE_NUM_LPQ_8710B 0x02
|
||
|
|
#define NORMAL_PAGE_NUM_NPQ_8710B 0x02
|
||
|
|
#define NORMAL_PAGE_NUM_EPQ_8710B 0x04
|
||
|
|
|
||
|
|
/* Note: For Normal Chip Setting, modify later */
|
||
|
|
#define WMM_NORMAL_PAGE_NUM_HPQ_8710B 0x30
|
||
|
|
#define WMM_NORMAL_PAGE_NUM_LPQ_8710B 0x20
|
||
|
|
#define WMM_NORMAL_PAGE_NUM_NPQ_8710B 0x20
|
||
|
|
#define WMM_NORMAL_PAGE_NUM_EPQ_8710B 0x00
|
||
|
|
|
||
|
|
|
||
|
|
#include "HalVerDef.h"
|
||
|
|
#include "hal_com.h"
|
||
|
|
|
||
|
|
#define EFUSE_OOB_PROTECT_BYTES (96 + 1)
|
||
|
|
|
||
|
|
#define HAL_EFUSE_MEMORY
|
||
|
|
#define HWSET_MAX_SIZE_8710B 512
|
||
|
|
#define EFUSE_REAL_CONTENT_LEN_8710B 512
|
||
|
|
#define EFUSE_MAP_LEN_8710B 512
|
||
|
|
#define EFUSE_MAX_SECTION_8710B 64
|
||
|
|
|
||
|
|
/* For some inferiority IC purpose. added by Roger, 2009.09.02.*/
|
||
|
|
#define EFUSE_IC_ID_OFFSET 506
|
||
|
|
#define AVAILABLE_EFUSE_ADDR(addr) (addr < EFUSE_REAL_CONTENT_LEN_8710B)
|
||
|
|
|
||
|
|
#define EFUSE_ACCESS_ON 0x69
|
||
|
|
#define EFUSE_ACCESS_OFF 0x00
|
||
|
|
|
||
|
|
#define PACKAGE_QFN32_S 0
|
||
|
|
#define PACKAGE_QFN48M_S 1 //definiton 8188GU Dongle Package, Efuse Physical Address 0xF8 = 0xFE
|
||
|
|
#define PACKAGE_QFN48_S 2
|
||
|
|
#define PACKAGE_QFN64_S 3
|
||
|
|
#define PACKAGE_QFN32_U 4
|
||
|
|
#define PACKAGE_QFN48M_U 5 //definiton 8188GU Dongle Package, Efuse Physical Address 0xF8 = 0xEE
|
||
|
|
#define PACKAGE_QFN48_U 6
|
||
|
|
#define PACKAGE_QFN68_U 7
|
||
|
|
|
||
|
|
typedef enum _PACKAGE_TYPE_E
|
||
|
|
{
|
||
|
|
PACKAGE_DEFAULT,
|
||
|
|
PACKAGE_QFN68,
|
||
|
|
PACKAGE_TFBGA90,
|
||
|
|
PACKAGE_TFBGA80,
|
||
|
|
PACKAGE_TFBGA79
|
||
|
|
}PACKAGE_TYPE_E;
|
||
|
|
|
||
|
|
#define INCLUDE_MULTI_FUNC_GPS(_Adapter) \
|
||
|
|
(GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS)
|
||
|
|
|
||
|
|
#ifdef CONFIG_FILE_FWIMG
|
||
|
|
extern char *rtw_fw_file_path;
|
||
|
|
extern char *rtw_fw_wow_file_path;
|
||
|
|
#ifdef CONFIG_MP_INCLUDED
|
||
|
|
extern char *rtw_fw_mp_bt_file_path;
|
||
|
|
#endif /* CONFIG_MP_INCLUDED */
|
||
|
|
#endif /* CONFIG_FILE_FWIMG */
|
||
|
|
|
||
|
|
/* rtl8710b_hal_init.c */
|
||
|
|
s32 rtl8710b_FirmwareDownload(PADAPTER padapter, BOOLEAN bUsedWoWLANFw);
|
||
|
|
void rtl8710b_FirmwareSelfReset(PADAPTER padapter);
|
||
|
|
void rtl8710b_InitializeFirmwareVars(PADAPTER padapter);
|
||
|
|
|
||
|
|
void rtl8710b_InitAntenna_Selection(PADAPTER padapter);
|
||
|
|
void rtl8710b_DeinitAntenna_Selection(PADAPTER padapter);
|
||
|
|
void rtl8710b_CheckAntenna_Selection(PADAPTER padapter);
|
||
|
|
void rtl8710b_init_default_value(PADAPTER padapter);
|
||
|
|
|
||
|
|
|
||
|
|
u32 indirect_read32_8710b(PADAPTER padapter, u32 regaddr);
|
||
|
|
VOID indirect_write32_8710b(PADAPTER padapter, u32 regaddr, u32 data);
|
||
|
|
u32 hal_query_syson_reg_8710b(PADAPTER padapter, u32 regaddr, u32 bitmask);
|
||
|
|
VOID hal_set_syson_reg_8710b(PADAPTER padapter, u32 regaddr, u32 bitmask, u32 data);
|
||
|
|
#define HAL_SetSYSOnReg hal_set_syson_reg_8710b
|
||
|
|
|
||
|
|
|
||
|
|
/* EFuse */
|
||
|
|
u8 GetEEPROMSize8710B(PADAPTER padapter);
|
||
|
|
|
||
|
|
#if 0
|
||
|
|
void Hal_InitPGData(PADAPTER padapter, u8 *PROMContent);
|
||
|
|
void Hal_EfuseParseIDCode(PADAPTER padapter, u8 *hwinfo);
|
||
|
|
void Hal_EfuseParseTxPowerInfo_8710B(PADAPTER padapter,
|
||
|
|
u8 *PROMContent, BOOLEAN AutoLoadFail);
|
||
|
|
void Hal_EfuseParseEEPROMVer_8710B(PADAPTER padapter,
|
||
|
|
u8 *hwinfo, BOOLEAN AutoLoadFail);
|
||
|
|
void Hal_EfuseParsePackageType_8710B(PADAPTER pAdapter,
|
||
|
|
u8 *hwinfo, BOOLEAN AutoLoadFail);
|
||
|
|
void Hal_EfuseParseChnlPlan_8710B(PADAPTER padapter,
|
||
|
|
u8 *hwinfo, BOOLEAN AutoLoadFail);
|
||
|
|
void Hal_EfuseParseCustomerID_8710B(PADAPTER padapter,
|
||
|
|
u8 *hwinfo, BOOLEAN AutoLoadFail);
|
||
|
|
void Hal_EfuseParseAntennaDiversity_8710B(PADAPTER padapter,
|
||
|
|
u8 *hwinfo, BOOLEAN AutoLoadFail);
|
||
|
|
void Hal_EfuseParseXtal_8710B(PADAPTER pAdapter,
|
||
|
|
u8 *hwinfo, u8 AutoLoadFail);
|
||
|
|
void Hal_EfuseParseThermalMeter_8710B(PADAPTER padapter,
|
||
|
|
u8 *hwinfo, u8 AutoLoadFail);
|
||
|
|
VOID Hal_EfuseParseBoardType_8710B(PADAPTER Adapter,
|
||
|
|
u8 *PROMContent, BOOLEAN AutoloadFail);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
void rtl8710b_set_hal_ops(struct hal_ops *pHalFunc);
|
||
|
|
void init_hal_spec_8710b(_adapter *adapter);
|
||
|
|
u8 SetHwReg8710B(PADAPTER padapter, u8 variable, u8 *val);
|
||
|
|
void GetHwReg8710B(PADAPTER padapter, u8 variable, u8 *val);
|
||
|
|
u8 SetHalDefVar8710B(PADAPTER padapter, HAL_DEF_VARIABLE variable, void *pval);
|
||
|
|
u8 GetHalDefVar8710B(PADAPTER padapter, HAL_DEF_VARIABLE variable, void *pval);
|
||
|
|
|
||
|
|
/* register */
|
||
|
|
void rtl8710b_InitBeaconParameters(PADAPTER padapter);
|
||
|
|
void rtl8710b_InitBeaconMaxError(PADAPTER padapter, u8 InfraMode);
|
||
|
|
void _8051Reset8710(PADAPTER padapter);
|
||
|
|
|
||
|
|
void rtl8710b_start_thread(_adapter *padapter);
|
||
|
|
void rtl8710b_stop_thread(_adapter *padapter);
|
||
|
|
|
||
|
|
#ifdef CONFIG_GPIO_WAKEUP
|
||
|
|
void HalSetOutPutGPIO(PADAPTER padapter, u8 index, u8 OutPutValue);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
void CCX_FwC2HTxRpt_8710b(PADAPTER padapter, u8 *pdata, u8 len);
|
||
|
|
|
||
|
|
u8 MRateToHwRate8710B(u8 rate);
|
||
|
|
u8 HwRateToMRate8710B(u8 rate);
|
||
|
|
|
||
|
|
#ifdef CONFIG_USB_HCI
|
||
|
|
void rtl8710b_cal_txdesc_chksum(struct tx_desc *ptxdesc);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
|
||
|
|
#endif
|